Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
TO PREVENT THE RISK OF FIRE HAZARD, REPLACE WITH SAME TYPE 250 VOLT FUSE. AVIS: DANS LE BUT DE REDUIRE LES RISQUES D'INCENDIE OU DE DECHARGE ELECTRIQUE, CET APPREIL NE DOIT PAS ETRE EXPOSE A LA PLUIE OU A L'HUMIDITE ET AUCUN OBJET REMPLI DE LIQUIDE, 120 VAC'V 60 Hr 300 WATTS 0. Fuse The fuse is located within the cap of the fuseholder. If the fuse fails, THE FUSE MUST BE REPLACED WITH THE SAME TYPE AND VALUE IN ORDER TO AVOID DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the unit repeatedly blows the fuse, it should be taken to a qualified service center for repair. 1. IEC Inlet U.S. Domestic AC Mains Cord The mains cord supplied with the unit is a heavy-duty, three conductor type with a conventional 120VAC plug with ground pin. If the outlet used does not have a ground pin, a suitable adapter should be used and the third wire grounded properly. All apparatus with class 1 construction shall be connected to a mains socket with a protective earthing connection. Never break off the grounding pin on any equipment. It is provided for your safety. The use of extension cords should be avoided but, if necessary, always use a three wire type with at least #14 AWG wire size. Always use a qualified electrician to install any electrical equipment. To prevent the risk of shock or fire hazard, always be sure the amplifier and all associated equipment is properly grounded. NOTE: For UK Only If the colors of the wires in the mains lead of this unit do not correspond with the colored markings identifing the terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E, the earth symbol, colored green or green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. (3) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red. 2. Extension Speaker Out Found only on the VYPYR® Tube 60 and Tube 120. If you have an extension speaker cabinet you may connect it here. Make sure you have a speaker cable and not an instrument cable. The store where you purchased your amplifier from should be able to supply you the proper cable. Also make sure your extension cabinet is rated at 16 Ohms. Failure to follow these instructions may cause damage to your amplifier. 3. 8 Pin MIDI Not available on the VYPYR 15 Connect your Sanpera I or Sanpera II here. This particular style of MIDI jack provides power to the Sanpera foot controllers and is required for their operation. m = PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: Iune 14,2006 Your PeaveyWarranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada. WhatThisWarranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, ren...
Эта инструкция также подходит к моделям:Музыкальные инструменты - VYPYR 15 (9.32 mb)
Музыкальные инструменты - VYPYR 75 (9.32 mb)
Музыкальные инструменты - VYPYR 60 TUBE (9.32 mb)
Музыкальные инструменты - VYPYR 30 (9.32 mb)