Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
62 2. Transmitted Data.................................................................................................................................. 62 Transmitted Messages..................................................................................................................62 3. Exclusive Communications................................................................................................................. 64 4. Parameter Address Map (Model ID = 00H 00H 20H)..................................................................... 64 Specifications........................................................................................68 FC-300 : MIDI FOOT CONTROLLER ...................................................................................................68 Index.......................................................................................................69 n Main Features • Features four modes (Standard Mode, Control Change Mode, System Exclusive Mode, Patch Mode) • Unit comes equipped with two expression pedals and two control pedals. You can also expand control even further with up to three external expression pedals or six external control pedals. • Includes 16-character x 2-line LCD • Equipped with RRC2 OUT connector; enables connection with RRC2 IN compatible devices with a single cable • Includes two separate amp control channels • Features three-way power supply (AC Adaptor, Dry battery, RRC2) Panel Descriptions Display 31 2 1 MODE indicator The current mode is indicated here. (p. 15) 2 BANK/NUMBER display The currently selected bank and number are indicated here. 3 Liquid Crystal display (LCD) A variety of information is shown in this display. Introduction Top Panel (Buttons) 1 2 3 4 65 1 PARAMETER button [ ] [ ] Press these to select parameters. 2 UTILITY button / INS (insert) button Press this when changing system settings. In the Edit screen, this is used to insert MIDI messages and blank spaces. 3 MODE button / DEL (delete) button Press this to change the FC-300’s operating mode. In the Edit screen, this is used to delete a MIDI message or a character at the cursor location. 4 VALUE button [ ] [ ] Use this when changing the values of settings. 5 EXIT button Press this to undo an operation and return to the previous screen. 6 WRITE button Press this to store settings and execute procedures. To jump to the main parameters, hold down one of these buttons while you press the other. With items for which there aren’t that many parameters, the FC-300 jumps to the last (or initial) parameter. • By continuing to hold down VALUE for a number of seconds, the value of the setting can be increased/ decreased continuously. • The value will increase rapidly if you hold down VALUE [ ], then press and hold VALUE [ ]. • The value will decrease rapidly if you hold down VALUE [ ], then press and hold [ ]. Introduction 1 [ ] [ ] (down / up) pedals Use these pedals to switch banks and select numbers. Additionally, you can switch modes by pressing the pedals simultaneously. 2 CTL (Control) pedals (1, 2) You can assign the desired functions to these pedals, then use them for control over those functions. 3 Number pedals (1/6 – 5/10) These switch the patch numbers. 4 Number pedal indicators (1/6 – 5/10) The indicator for the currently selected number lights. A red indicator lights when a number from 1 through 5 is selected; a green indicator lights when a number from 6 through 10 is selected. 5 EXP PEDAL (expression pedal) (1, 2) These control the volume, wah, or other aspects of connected devices. 6 EXP PEDAL SW (expression pedal switch) (1, 2) Firmly press down at the front of the pedal to switch the effect on and off. 7 EXP PEDAL SW indicators (expression pedal switch indicators) (1, 2) Lights when the effect being controlled with the EXP PEDAL SW is on, and goes out when the effect is turned off. Top Panel (Pedals) When you operate the expression pedal, please be careful not to get your fingers pinched between the movable part and the panel. In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. Introduction 1 [ ] [ ] (down / up) pedals Use these pedals to switch banks and select numbers. Additionally, you can switch modes by pressing the pedals simultaneously. 2 CTL (Control) pedals (1, 2) You can assign the desired functions to these pedals, then use them for control over those functions. 3 Number pedals (1/6 – 5/10) These switch the patch numbers. 4 Number pedal indicators (1/6 – 5/10) The indicator for the currently selected number lights. A red indicator lights when a number from 1 through 5 is selected; a green indicator lights when a number from 6 through 10 is selected. 5 EXP PEDAL (expression pedal) (1, 2) These control the volume, wah, or other aspects of connected devices. 6 EXP PEDAL SW (expression pedal switch) (1, 2) Firmly press down at the front of ...