Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
yAfter the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device connected by an optical cable. yDepending on the connected device, this function may not operate. yIt is not available to turn on the unit by AUTO POWER function if you turn off the unit directly. yWhen booting this unit on LG TV fucntion, it takes about 25 seconds to turn it on and the red LED is blinking twice per second. During that time, you cannot control this unit except turn it off. yIn Bluetooth Mode This Unit may be Turned ON by Auto Power setting depending on connected bluetooth device and LG TV function selected. In this case the Unit will be turned OFF automatically and when you restart the Unit it will be turned ON by LG TV function. , 16 Operating 3 Operating AUTO POWER On/Off This function automatically turns on/off the unit when you turn on/off the T V or the external device (DVD Player, Blu-ray Disc Player, etc.) connected to this unit. It is supported only on OPTICAL and LG T V functions. Turn on or off AUTO POWER function by using AUTO POWER ON/OFF on the remote control. Note Using Bluetooth technology About Bluetooth Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when there is interference by the other electronic waves which run on same frequency or if you connect bluetooth devices in the other rooms nearby. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. Available Devices : Mobile phone, MP3, Laptop, PDA etc. Bluetooth profiles In order to use Bluetooth® wireless technology, devices must be able to interpret certain profiles. This unit is compatible with following profile. A2DP (Advanced Audio Distribution Profile) Operating 17 Listening to music stored on the Bluetooth devices Pairing this unit and Bluetooth device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select the Bluetooth function by using on the remote control. Then the orange LED on the unit starts to blink. 2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your unit appears as “LG SOUND BAR (XX:XX)”. Note , XX:XX means the last four digits of BT address. For example, if your unit has a BT address such as 9C:02:98:4A:F7:08, you will see “LG SOUND BAR (F7:08)” on your Bluetooth device. 3. Enter the PIN code. PIN code : 0000 Note , Depending on the Bluetooth device type, some device have a different pairing way. 4. The orange LED is lit up for about 3 seconds when this unit successfully paired with your Bluetooth device. 5. Listen to music. To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide. yWhen using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance. However it may not work well in the case below : -There is a obstacle between the unit and the bluetooth device. -There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device. yYou should connect your Bluetooth device to this unit again when you restart it. yWhen you select Bluetooth function again after changing to other functions, Bluetooth connection may be disconnected. You should reconnect the bluetooth device to use this function. yThe sound may be interrupted when the connection interfered by the other electronic wave. yYou cannot control the Bluetooth device with this unit. yPairing is limited one Bluetooth device per one unit and multi-pairing is not supported. yDepending on the type of the device, you may not be able to use the Bluetooth function. yYou can enjoy wireless system using phone, MP3, Notebook, etc.. yThe more distant between the unit and the bluetooth device, the lower the sound quality becomes. yBluetooth connection will be disconnected when the unit is turned off or the bluetooth device gets far from the unit. yWhen Bluetooth connection is disconnected, connect the bluetooth device to the unit again. yWhen not connected the Bluetooth, orange LED is blinking. , Note 3 Operating 18 Operating 3 Operating Other operations Turn off the sound temporarily You can mute your unit, for example, to answer the telephone. Press i on the remote control. Red LED blinks and there is no sound on the unit. To cancel it, press i again on the remote control or change the volume level. Adjust the...