Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Домашние кинотеатры - NB4530A (684.74 kb)
Домашние кинотеатры - NB4530A (1.14 mb)
Фрагмент инструкции
>Caution Setting up Pairing wireless subwoofer LED indicator of wireless subwoofer LED Color Status Yellow The wireless subwoofer is receiving the signal of the unit. Yellow (blink) The wireless subwoofer is trying to connect. Red The Wireless subwoofer is in standby mode. Off (No display) The power cord of wireless subwoofer is disconnected. Setting up the wireless subwoofer for the first time 1. Connect the power cord of the Wireless subwoofer to the outlet. 2. Turn on the main unit : The main unit and wireless subwoofer will be automatically connected. Manually pairing wireless subwoofer When your connection is not completed, you can see the red LED on the woofer and woofer is not made sound. To solve the problem, follow the below steps. 1. Press and hold I STOP button on the unit and MUTE button on the remote control simultaneously. - Displays the “REMATE”. 2. Press PAIRING on back of the woofer. -The yellow LED will flicker. 3. Turn off and on the unit. - If you see “Yellow” LED, it’ s successful. 4. If you don’t see “Yellow” LED, try again Step 1 - Step 3. Connecting 13 yIf you operate main unit then wireless subwoofer sound within a few seconds in standby mode. ySet the distance between this unit and wireless subwoofer within 10 m (32 ft.). yOptimum performance can be implemented only when the unit and the Wireless subwoofer within distance of 2 m (6 ft.) to 10 m (32 ft.) is used since communication failure may occur if longer distance is used. yIt takes a few seconds (and may take longer) for the unit and subwoofer to communicate with each other. , Note You can enjoy the TV sound through the speakers of this unit. But in the case of some TV models, you must select external speakers state of the TV on the menu. (For details, refer to your TV user manual.) , Note 2 Connecting Connecting to your TV Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of the T V. Using an OPTICAL cable 1. Connect the OPT. IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable. Optical cable 2. Set the INPUT source to OPTICAL. Press repeatedly FUNCTION on the remote control or F on the unit until the function is selected. For selecting directely the OPTICAL function, press OPTICAL on the remote control. 14 Connecting Connecting with this unit and TV using an HDMI cable If you connect with this unit and TV that supports HDMI CEC and ARC (Auto Return Channel) , you can enjoy the TV sound through the speakers of this unit without connecting optical cable. Connecting 2 HDMI cable HDMI CEC (Consumer Electronic Control) : With a single remote control is the ability to operating.The CEC compatible devices ( TV, Sound Bar, Blu-ray player, etc.) , Note HDMI cable Checklist Some HDMI cables do not support the ARC function, sound output can cause problems. When connecting this unit and the TV is there no sound or sound in the event of interruption and noise, there is a problem with the HDMI cable. Therefore connect with this unit and TV after check whether the Type A, High speed HDMI TM Cable with Ethernet. STANDARD HDMI CABLE WITH ETHERNET HIGH SPEED HDMI CABLE HIGH SPEED HDMI CABLE WITH ETHERNET (X) (X) (O) Enjoy rich sound broadcast of the channel by the sound bar Connection through HDMI Cable Your television that you own should support the newest HDMI features (1)HDMI CEC / ARC (Audio Return Channel)) to fully enjoy the Live broadcasting channel with audio system through a HDMI cable. Unless your T V support these HDMI features, this audio system should be connected through an OPTICAL cable instead of a HDMI cable to your TV to enjoy the sound of TV channel. 1) HDMI CEC (High-Definition Multimedia Interface Consumer Electronics Control) Consumer Electronics Control (CEC) is an HDMI feature designed to allow the user to command and control the CEC-enabled devices, that are connected through HDMI by using only one of their remote controls. . Trade names for CEC are SimpLink G) , Anynet+ (Samsung), BRAVIA Sync (Sony), EasyLink (Philips), etc. All of the graphical user Interface (GUI) and accessing steps (Step 02 DStep 03) to activate the ARC / HDMI CEC would be different depending on TV manufacture. Refer to your TV User Manual for in-depth information. , Connecting 15 2 Connecting 1. Link the devices through HDMI Cable TV : HDMI IN (ARC) port Audio : HDMI OUT port HDMI cable 2. Activate ARC mode TV : SetupDAudio or SoundDARC mode (must be ON) Note 3. Select the Speaker T V : Press ‘Input’ button on your TV remote control D HDMI CEC D should be ON D Select your speaker that you want to enjoy. . LG TV : Press ‘Input’ or ‘Simplink’ button on your T V remote. D Simplink must be ‘ON’ at Simplink setting D Change the speaker from ‘TV Speaker’ to ‘HT(S) Speaker’ or ‘External Speaker (Optical / HDMI ARC)’ Note You can also enjoy extra functions such as USB / Bluetooth with ‘Function’ button on remote control of this audio system. When you back to live T V c...