Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
– a disc recorded with a complicated tree structure – a disc recorded in multisession mode – a disc that has not been finalized (a disc to which data can be added) – a disc that has many folders The disc tray does not open and “LOCKED” appears. Contact your Sony dealer or local authorized Sony service facility. Additional Information 23GB USB device USB device Select a function other than tuner function or turn on the CD player/USB device power. See “To improve disc loading performance” (page 26). You cannot start transferring to a USB device. The following problems may have occurred. – The USB device is full. – The number of files and folders on the USB device has reached the upper limit. – The USB device is write-protected. Transferring is stopped before it is finished. • You are using an unsupported USB device. Check the information on the websites about compatible USB devices (page 12). • The USB device is not formatted correctly. Refer to the USB device operation manual for how to format. • Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again. • If the transfer and erase operations are repeated multiple times, the file structure within the USB device becomes fragmented. Refer to the USB device operation manual for how to deal with this problem. Transferring music to a USB device results in an error. • You are using an unsupported USB device. Check the information on the websites about compatible USB devices (page 12). • Turn off the system and remove the USB device. If the USB device has a power switch, turn the USB device off and then on again after removing it from the system. Then perform transferring again. • The USB device was disconnected or the power was turned off during the transfer process. Delete the partially- transferred file, and perform transferring again. If this does not fix the problem, the USB device may be broken. Refer to the USB device operation manual for how to deal with this problem. Files or folders on the USB device cannot be erased. • Check if the USB device is write- protected. • The USB device was disconnected or the power was turned off during the erase operation. Delete the partially- erased file. If this does not fix the problem, the USB device may be broken. Refer to the USB device operation manual for how to deal with this problem. Are you using a supported USB device? If you connect an unsupported USB device, some problems may occur. Check the information on the websites about compatible USB devices (page 12). “OVER CURRENT” appears. A problem has been detected with the level of electrical current from the (USB) port. Turn off the system and remove the USB device from the (USB) port. Make sure there is no problem with the USB device. There is no sound. The USB device is not connected correctly. Turn off the system and reconnect the USB device, then turn on the system and check if “USB MEMORY” lights up on the display. 24GB There is noise, skipping, or distorted sound. • Turn off the system and reconnect the USB device, then turn on the system. • The music data itself contains noise, or the sound is distorted. Noise may have entered during the transfer process. Delete the file, and try transferring again. • The bit rate setting used for encoding the audio file was low. Send files encoded with higher bit rates to the USB device. The USB device cannot be connected into the (USB) port. The USB device is being connected backwards. Connect the USB device in the correct orientation. “READING” is displayed for an extended time, or it takes a long time before playback starts. The reading process can take a long time in the following cases. – There are many folders or files on the USB device. – The file structure is extremely complex. – The memory capacity is excessive. – The internal memory is fragmented. Thus, Sony recommends following guidelines. – Total folders on USB device: 100 or less – Total files per folder: 100 or less Erroneous display • Send the music data to the USB device again, as the data stored in the USB device may have been corrupted. • The character codes that can be displayed by this system are numbers and alphabet only. Other characters are not displayed correctly. The USB device is not recognized. • Turn off the system and reconnect the USB device, then turn on the system. • Check the information on the websites about compatible USB devices (page 12). • The USB device is not working properly. Refer to the USB device operation manual for how to deal with this problem. Play does not start. • Turn off the system and reconnect the USB device, then turn on the system. • Check the information on the websites about compatible USB devices (page 12). •Press N (or NX on the unit) to start playback. Play does not start from the first track. Return to Normal Play by pressing PLAY MODE repeatedly until both “PGM” and “SHUF” disa...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-EX700 (965.58 kb)
Музыкальные центры - MHC-EX600 (965.58 kb)