Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
• Remove the disc and wipe away the moisture on the disc, then leave the system turned on for a few hours until the moisture evaporates. •Press nN to start play. Disc access takes a long time. • Set “CD POWER ON” by CD power manage function (page 13). The sound skips. • Wipe the disc clean (page 31). • Replace the disc. • Try moving the system to a place without vibration (e.g., on top of a stable stand). • Try moving the speakers away from the system, or placing them on separate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. Play does not start from the first track. • Press PLAY MODE/DIRECTION on the CD player repeatedly until both “PGM” and “SHUF” disappear to return to Normal Play. MP3 audio track cannot be played back. • Recording was not performed according to the ISO 9660 level 1 or level 2 format, or Joliet in the expansion format. • The MP3 audio track does not have the extension “.MP3”. • The data is not stored in MP3 format. • Discs containing files other than MPEG 1, 2, 2.5 Audio Layer-3 files cannot be played. MP3 audio tracks take longer to play back than others. • After the system reads all tracks on the discs, playback may take more time than usual if: – the number of albums or tracks on the disc is very large. – the album and track organization structure is very complex. The album title, track title and ID3 tag do not appear correctly. • Use a disc that conforms with ISO 9660 level 1, level 2, or Joliet in the expansion format. • The disc ID3 tag is not ver. 1 or ver. 2. 28GB Tuner Severe hum or noise/stations cannot be received. • Set the proper band and frequency (page 12). • Connect the antenna properly (page 7). • Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna. • The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. • Locate the antennas as far away from the speaker cords as possible. • Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. • Try turning off surrounding electrical equipment. • Set “CD POWER OFF” by CD power manage function (page 13). A stereo FM program cannot be received in stereo. • Press REPEAT/FM MODE on the CD player until “MONO” disappears. Tape deck The tape does not record or play, or there is a decrease in sound level. • The heads are dirty. Clean them (page 32). • The record/playback heads are magnetised. Demagnetise them (page 32). The tape does not erase completely. • The record/playback heads are magnetised. Demagnetise them (page 32). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty. Clean them (page 32). Noise increases or the high frequencies are erased. • The record/playback heads are magnetised. Demagnetise them (page 32). The tape does not record. • No cassette is loaded. Load a cassette. • The tab has been removed from the cassette. Cover the broken tab with adhesive tape (page 32). • The tape has wound to the end. After pressing nN, there is a mechanical noise, “EJECT” appears in the display, and the unit enters standby mode automatically. • Insert the cassette correctly. If the system still does not operate properly after performing the above measures, reset the system as follows: Use buttons on the CD player for the operation. 1 Disconnect the power cord. 2 Reconnect the power cord. 3 Press x, EQ EDIT and ?/1 at the same time. 4 Press ?/1 to turn on the system. The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer. Troubleshooting 29GB Messages One of the following messages may appear or flash in the display during operation. CD/MP3 NO DISC There is no disc in the player. OVER You have reached the end of the disc while pressing M during playback or pause. Push STOP! You pressed PLAY MODE/DIRECTION on the CD player during playback. Step Full! You tried to program 26 or more tracks (steps). Tape No Tab You cannot record the tape because the tab has been removed from the cassette. No Tape There is no tape in the tape deck. 30GB Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply. On safety • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Unplug the system from the wall outlet (mains) if it is not to be used for an extended period of time. To disconnect the power cord (mains lead), pull it out by the plug. Never pull the cord itself. • Should any solid object or liquid fall into the system, unplug the system and have it checked by qualified personnel before operating it any further....
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-WZ50 (507.32 kb)