Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. Connect this unit and a source (playing) VCR using the following diagram. [Fig.8][This unit] VIDEO INOUT AUDIO INOUT L R VCR or camcorder] [Ex: Source (playing) Audio/Video adapter cable (not supplied) 1)Insert a pre-recorded video cassette into the source VCR or camcorder. 2)Insert a blank video cassette, or one you want to record over, into the cassette compartment.of the unit. 3)Press the SPEED button on remote control for the unit to select the desired recording speed (SP/SLP). 4)Press the CHANNEL button K or L on the front panel until “AUX” appears on the screen. 5)Press the RECORD button on the unit. 6)Begin playback of the tape in the source VCR or camcorder. NOTE: For best results during copying, use the front panel controls of the unit whenever possible. The remote control might affect the source VCR’s playback operation. 7)To stop copying, press the STOP/EJECT button on the unit, then stop the tape on the source VCR or camcorder. - 31-EN 1C29 TIMER RECORDING AUTOMATIC TIMER RECORDING TV/VCR You may set the unit to start and end a recording while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: July 10th, 2005 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: SP Make sure ... • If a cable box or satellite box is connected to the unit, you will be limited to record only one channel. And the channel selector on the unit must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes. • Clock must be set to the correct time and date before setting the timer. • The unit must be turned on to program it. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) • The channel you want to record is properly set in advance. (See page 16.) Avoid over lap of programs ... There is a chance that a program will not be recorded. when programs overlap; • The program with an earlier start has priority. • Once the earliest program finishes, the overlapping programs will begin recording in sequence. • If the starting time is the same, the program in the highest position on the list has priority. • The illustration below demonstrates the sequence of recordings. Program 1 10:00AM -11:00AM Program 2 9:00AM -10:00AM Program 3 9:30AM -12:00PM Recording Sequence Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM 9:00AM 10:00AM 11:00AM 12:00PM *Recording period is SHADED 1 Select “TIMER PROGRAMMING” Press the SETUP button on the - TV/VCR SETUP B TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER’S SET UP remote control. V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] Confirm “TIMER PROGRAM MING” is pointed by pressing the ZERO RETURN TIME SEARCH INDEX SEARCH Arrow button K. And press the ENTER button. • If you have not yet set the clock, “MANUAL CLOCK SET” appears. If so, follow steps [3] to [8] on pages 15 and 16. Then set the timer recording. 2 Select your desired program position (1~8) Press the Arrow button K or L to Then, press the Arrow button B. – TIMER PROGRAMMING – CH DATE BEGIN END - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - B -/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - - --/- -- - --:- --:- -- - 3 Set the channel number Press the Arrow button K or L until – TIMER PROGRAMMING – CH DATE BEGIN END the desired channel number - --/- -- - --:- --:- -- - --/- -- - --:- --:- -- appears. (Example: CH61) - --/- -- - --:- --:- -- B 61 -/- -- - --:- --:- -- - --/- -- - --:- --:- -- Then, press the Arrow button B. - --/- -- - --:- --:- -- - --/- -- - --:- --:- -- - --/- -- - --:- --:- -- NOTE: If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. 4 Select once, every day or weekly recording For once recording : – TIMER PROGRAMMING – Press the Arrow button K (up) CH DATE BEGIN END until the desired date appears. - - --:- --:- -- B 61 7/10 SUN -:- --:- -- - --/- - --/- -- - --:- --:- -- - - - - --/- -- - --:- --:- -- (Example: “7/10” for July 10th). - --/- -:- --:- -- Then, press the Arrow button B. - --/- -- - --:- --:- -- - --/- -- - --:- --:- -- - --/- -- - --:- --:- -- For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) – TIMER PROGRAMMING – CH DATE BEGIN END Press the Arrow button L (down) - --/- -- - --:- --:- -- until “EVRY DAY” appears. - --/- - - --:- --:- -- - --/- - - --:- --:- -- B 61 EVRY DAY -:- --:- -- - - --:- --:- -- - --/- -- - --:- --:- -- - --/- -- - --:- --:- -- - --/- -- - --:- --:- -- Then, ...