Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
* The tape automatically stops after playing back five times. Other operations To Do this Stop play Press x. Pause Press X. Press again to resume play. Fast-forward or Press m/M. rewind Remove a tape Press Z PUSH OPEN/CLOSE on the unit. Tape – Play 11GB Tape – Recording Recording your favorite CD tracks on a tape — CD Synchro Recording You can record a whole CD on a tape. You can use TYPE I (normal) tape. 1 Load a recordable tape. 2 Load a CD you want to record. 3 Press CD SYNC on the unit. The tape deck stands by for recording and the CD player pauses for playback. When you want to record on the reverse side, press TAPE nN. 4 Press PLAY MODE/DIRECTION repeatedly to select “g” to record on one side or “h” to record on both sides. 5 Press zREC PAUSE/START on the unit. Recording starts. When the recording is completed, the CD player and the tape deck stop automatically. To stop recording Press x. To record only your favorite CD tracks You can record only your favorite CD tracks using Program Play. Between steps 2 and 3, perform steps 1 to 5 of “Creating your own program” (page 7). Note When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. Recording on a tape manually — Manual Recording You can record just the portions you like from a CD on a tape. You can also record a radio program. You can use TYPE I (normal) tape. 1 Load a recordable tape. 2 Select the desired source to record. • CD: To record from this system’s CD player. • TUNER: To record from this system’s tuner. • MD: To record from the optional component connected to the MD IN jacks. 3 Press zREC PAUSE/START on the unit. The tape deck stands by for recording. When you want to record on the reverse side, press TAPE nN. 4 Press PLAY MODE/DIRECTION repeatedly to select “g” to record on one side or “h” to record on both sides. 5 Press zREC PAUSE/START on the unit, then start playing the desired source to record. Recording starts. Other operations To Do this Stop recording Press x. Pause Press zREC PAUSE/START on the recording unit. Tip For recording from a CD, you can press ./> to select tracks during recording pause mode (after step 3 and before step 5). Note When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. 12GB Sound Adjustment Adjusting the sound Timer Falling asleep to music You can adjust the bass and treble to enjoy more powerful sound. Generating a more dynamic sound (Dynamic Sound Generator) Press DSG. To cancel the DSG, press DSG again. Adjusting the bass and treble Using buttons on the remote Press BASS +/– repeatedly to adjust the bass, or TREBLE +/– repeatedly to adjust the treble. Using buttons on the unit 1 Press BASS/TREBLE repeatedly to select “BASS” or “TREBLE”. Each time you press the button, the display changes cyclically as follows: BASS t TREBLE t Original display 2 Press ./> repeatedly to adjust the level while “BASS” or “TREBLE” appears. —Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP repeatedly. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90 t 80 t … t 10 t OFF * The system automatically turns off in 100 minutes or after the current CD or tape finishes playing. Other operations To Press Check the SLEEP once. remaining time** Change the time SLEEP repeatedly to select the to turn off time you want. Cancel the Sleep SLEEP repeatedly until “OFF” Timer function appears. **You cannot check the remaining time if you select “AUTO”. Note Do not set to “AUTO” during Synchro Recording on a tape. Tip You can use the Sleep Timer, even if you have not set the clock. Timer 13GB Waking up to music — Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 5). 1 Prepare the sound source you want to play. • CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 7). • TAPE: Load a tape. • TUNER: Tune in a radio station (see “Listening to the radio” on page 9). 2 Press CLOCK/TIMER SET. 3 Press ./> repeatedly until “PLAY” appears, then press CLOCK/ TIMER SET. “ON TIME” appears and the hour indication flashes. 4 Set the time to start playback. Press ./> repeatedly to set the hour, then press CLOCK/TIMER SET. The minute indication flashes. Press ./> repeatedly to set the minute, then press CLOCK/TIMER SET. 5 Set the time to stop playback following the same procedure as step 4. 6 Press ./> repeatedly depending on the sound source you want to play. Each time you press the button, the display changes cyclically as follows: CD t TAPE t TUNER 7 Press VOL +/– repeatedly (or turn VOLUME on the unit) to adjust the volume. 8 Press ?/1 to turn off the system. Other operations To Do this Check or change Turn on the s...