Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
4) File numbers are assigned serially thereafter. 5) A new file is created in the “REC1” folder each time REC1 is performed. Notes .Do not remove the USB device during transfer or erase operations. Doing so may corrupt the data on the USB device or damage the USB device itself. .Do not connect the system and the USB device through an USB hub. .When transferring music from a CD, the tracks are transferred as 128 kbps MP3 files. When transferring music from an MP3 disc, MP3 files are transferred with the same bit rate as the original MP3 files. .While transferring music from an MP3 disc, no sound is output and “High Speed” appears. .CD text information is not transferred in the created MP3 files. .If you cancel the transfer partway, an MP3 file is created up to the point when the transfer was stopped. .Transferring stops automatically if: . the USB device runs out of space during the transfer process. . the number of audio files on the USB device reaches the limit for the number that the system can recognize. .The maximum number of audio files and folders that can be contained on a single USB device is 999 (including the “ROOT” and “MUSIC” folders). The maximum number of audio files and folders may vary depending on the audio file and folder structure. 0GB .You cannot erase audio files and folders in shuffle play mode or program play mode. .You cannot erase audio files and folders in shuffle play mode or program play mode. .If a folder or file that you are trying to transfer already exists on the USB device with the same name, a sequential number is added after the name without overwriting the original folder or file. Listening to music of an USB device You can listen to music stored in the USB device. The audio formats that can be played back by this system are as follows: MP3*/WMA*/AAC* Check the information on the websites about compatible USB devices that can be connected to this system (page 39). * Files with copyright protection (Digital Rights Management) cannot be played by this system. Files downloaded from an online music store may not be played by this system. 1 Select the USB function. Press FUNCTION +/. (or FUNCTION on the unit) . repeatedly. 2 Connect an optional USB device to the (USB) port .. When the USB device is connected, the display changes as follows: “Reading” . “Storage Drive*” * When connecting an USB storage device, the volume label is displayed next if recorded. Note It may take about 10 seconds before “Reading” appears depending on the type of USB device connected. Basic Operations Continued . 1GB 3 3 Press . (or USB .. on the unit) .. 4 Adjust the volume. Press VOLUME +/. (or turn the VOLUME control on the unit) .. Other operations To Press Pause playback . (or USB .. on the unit) .. To resume play, press the button again. Stop playback ... To resume play, press . (or USB .. on the unit) .1). To cancel resume play, press .. again. Select a folder +/... Select a file ./... Select a folder SEARCH . on the and file while unit. Press ./. viewing the . to select the desired folder and file folder, then press (or names on the ENTER on the unit) system display2) .. Press ./. . to select the desired file, then press (or ENTER on the unit) .. Find a point in Hold down ./. a file . during playback, and release the button at the desired point. Select Repeat REPEAT . repeatedly Play until “REP” or “REP1” appears. Remove the Hold down .. on USB device the unit until “No Device” appears, then remove the USB device. 1) When playing a VBR MP3/WMA file, the system may resume playback from a different point. 2) You can search by different information such as album or genre for digital music players. To change the play mode Press PLAY MODE . repeatedly while the USB device is stopped. You can select normal play (“ ” for all files in the folder on the USB device), shuffle play (“SHUF” or “ SHUF”), or program play (“PGM”). Notes on the USB device .You cannot change the play mode during playback. .Some time may be needed to start playback when: . the folder structure is complex. . the memory capacity is excessive. .When the USB device is inserted, the system reads all the files on the USB device. If there are many folders or files on the USB device, it may take a long time to finish reading the USB device. .Do not connect the system and the USB device through an USB hub. .With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. GB .This system does not necessarily support all the functions provided in a connected USB device. .This system does not necessarily support all the functions provided in a connected USB device. .Always hold down .. on the unit and make sure that “No Device” appears before removing the USB device. Removing the USB device while “No Device” is not displayed may corrupt the data on it or damage the USB device itself. .Do not save other types of files or unnecessary folders on an USB device that has audio files. .F...