Оценок - , средний балл:
(
)
)
Производитель: Sony
Размер: 522.46 kb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Фрагмент инструкции
4 Press =or +repeatedly until the desired track appears in the display. Total playing timeDisc number (including selected track) SHUFFLE REPEAT1 ALL 1 DISCS PROGRAM STEP VOLUME SYNC § Track number 5 Press ENTER/NEXT. The track is programmed and the program step number appears. =+ (Pp( (0) The last programmed track 3 p 4 SHUFFLE REPEAT 1 ALL 1 DISCS PROGRAM STEP VOLUME SYNC § 7 7 Program step number CLEAR CHECK 1 6 To program additional tracks, repeat steps 3 to 5. Skip step 3 to select tracks from the same disc. 7 Press CD (P(or CD (on the remote). All the tracks play in the order you selected. To cancel Program Play Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. To Press Check the program CHECK on the remote repeatedly. After the last track, “CHECK END” appears. Clear a track from CLEAR on the remote in the end stop mode. Clear a specific CHECK on the remote track repeatedly until the number of the track to be erased appears, then press CLEAR. Add a track to the 1Select a disc tray with a program DISC 1 – 3 button. 2Select the track by pressing = or + repeatedly. 3Press ENTER/NEXT. Clear the entire ponce in stop mode or program twice while playing. Tips • The program you made remains in the CD player even after it has been played back. Press CD (P to play the same program again. • If “--.--” appears instead of the total playing time during programming, this means: – you have programmed a track number which exceeds 20, or – the total playing time has exceeded 100 minutes. The Tape Deck The Tape Deck Recording on a tape manually You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. 4 32 TAPE B 9p TAPE B ( 5 1 1 Press ¤and insert a blank tape into deck B. 2 Press FUNCTION repeatedly until the source you want to record (e.g., CD) appears. 3 Press REC. Deck B stands by for recording. The indicator on TAPE B ((for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 5 Press PAUSE. Recording starts. 6 Start playing the source to be recorded. To Press Stop recording p. Pause recording PAUSE. Tip If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing REC in step 3. 1 Follow steps 1 to 6 in Recording CDs by “Programming the CD tracks” (see specifying the page 20). track order 2 Press ¤and insert a blank tape into — Program Edit deck B. You can record tracks from all the CDs in the 3 Press CD SYNC. order you want. When programming, make Deck B stands by for recording and the sure the playing times for each side do not CD player stands by for playback. exceed the length of one side of the tape. The indicator on TAPE B ((for front side) lights up. 4 TAPE B (p 53 4 Press DIRECTION repeatedly to select Ato record on one side. Select § (or RELAY) to record on both sides. 5 Press PAUSE. Recording starts. To stop recording Press p. To cancel Program Edit Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. PLAY MODE 2 continued Recording CDs by specifying the track order (continued) Selecting tape length automatically — Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. DISC SKIP/ EX-CHANGE 2 31 1 Place a CD on the disc tray. If the disc number you want to record is not displayed, press DISC SKIP/ EX-CHANGE repeatedly so that it appears. 2 Press FUNCTION repeatedly until “CD” appears in the display. 3 Press EDIT once so that “EDIT” flashes. The required tape length for the currently selected CD appears, followed by the total playing time for sides A and B respectively. Note You cannot use this function after programming. In order to use this function, you must first erase the program (see “Clear the entire program” in the table on page 21). Sound Adjustment Sound Adjustment Adjusting the sound You can reinforce the bass and listen with headphones. PHONES DBFB To reinforce bass (DBFB) Press DBFB*. “DBFB ” appears in the display. To cancel DBFB, press DBFB so that “DBFB ” disappears from the display. * DBFB = Dynamic Bass Feedback To listen through the headphones Connect the headphones to PHONES jack. No sound will come from the speakers. Selecting the audio emphasis The audio emphasis menu lets you select the sound characteristic according to the sound you are listening to. FILE SELECT DISPLAY/DEMO /Press FILE SELECT repeatedly until the effect (ROCK, POP or DANCE) you desire appears in the display. To cancel the effect Press FILE SELECT repeatedly until “FLAT” appears in the display. continued Selecting the audio emphasis (continued) To change the spectrum analyzer display Press DISPLAY/DEMO repeatedly to select one of the displays below. Pattern 1 VOLUME ALL DISCS § (Changes with music) Pattern 2 VOLUME ALL DISCS § Note The spectrum analyzer d...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-GRX20 (522.46 kb)
- ()
- ()