Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Sony, модель MHC-GRX20

Производитель: Sony
Размер: 522.46 kb
Название файла: 3866217111.pdf
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve broadcast reception, reorient the supplied antennas. Recording from the radio You can record the radio program on a tape by calling up a preset station. You can use a TYPE I (normal) tape. 1/u (power) TAPE B (p 41 2 – + 35 6TAPE B 9 1 Press TUNER/BAND to select the band you want. 2 Press =or +repeatedly to tune in the desired preset station. Press =for lower preset numbers. Press +for higher preset numbers. Preset number Frequency VOLUME MHz kHzALL DISCS § 3 Press ¤and insert a blank tape into deck B. With the side you want to record facing forward 4 Press REC. Deck B stands by for recording. The indicator on TAPE B ((for front side) lights up. 5 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 6 Press PAUSE. Recording starts. To stop recording Press p. Tips • If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing REC in step 4. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, use – and + (0/ )on the remote) in step 2 to tune in the desired station. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use a TYPE I (normal) tape. To select either deck A or B, press DECK A (or DECK B (on the remote. TAPE B 9 1/u =/+ Basic Operations (power) 3 0) VOLUME PAUSE3 p112 =+ (Pp( (0) 3 P 1/u (power) p =/+ 0/) 3 VOL +/– continued Playing a tape (continued) 1 Press ¤and insert a recorded tape in deck A or B. You can play the reverse side only on deck B. If you use only deck A, go to step 3. With the side you want to play facing forward 2 Press DIRECTION repeatedly to select Ato play one side. Select §* to play both sides. To play both decks in succession, select RELAY (relay play).** 3 Press TAPE A ( or TAPE B ( (DECK A (or DECK B ( on the remote). Press TAPE B 9(DECK B (again on the remote) to play the reverse side. The tape starts playing. * The deck stops automatically after repeating the sequence five times (Deck B only). **To enjoy relay play, the tape in deck A must be always on the front side. If the tape in deck A is on the reverse side, only the tape in deck B repeats playing both sides. To Do this Stop play Press p. Pause Press PAUSE (or Pon the remote). Press again to resume play. Fast-forward Press ). Rewind Press 0. Remove the cassette Press ¤. Adjust the volume Turn VOLUME (or press VOL +/– on the remote). Tips • Pressing TAPE A (, TAPE B (or TAPE B 9 when the system is off automatically turns the system on and starts tape playback if there is a tape in the deck (One Touch Play). • You can switch from another source to the tape deck just by pressing TAPE A (, TAPE B (or TAPE B 9(Automatic Source Selection). Searching for the start of the current or the next track (AMS*) To go forward Press +during play when the (indicator is lit. “TAPE A (or TAPE B) >>> +1” appears. Press =** during play when the 9indicator is lit. “TAPE B <<< +1” appears. To go back Press =during play when the (indicator is lit. “TAPE A (or TAPE B) <<< –1” appears. Press +** during play when the 9indicator is lit. “TAPE B >>> –1” appears. * Automatic Music Sensor **Deck B only Note The AMS function may not operate correctly under the following circumstances: – When the unrecorded space between songs is less than 4 seconds long. – If completely different information is recorded on the left and right channels. – When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax). – When the system is placed near a television. (In this case, move the system farther away from the television or turn off the television.) Recording from a tape You can use a TYPE I (normal) tape. 1/u (power) 4 TAPE B (p 2 TAPE B 9 1 31 1 Press ¤and insert a recorded tape in deck A and a blank tape in deck B. With the side you want to play/record facing forward 2 Press REC. Deck B stands by for recording. The indicator on TAPE B ((for front side) lights up. 3 Press PAUSE. Recording starts. 4 Press TAPE A (. To stop recording Press p. Tip If you want to record from the reverse side, press TAPE B 9to light its indicator after pressing REC in step 2. Basic Operations The CD Player The CD Player Using the CD display You can check the remaining time of the current track. DISPLAY/DEMO /Press DISPLAY/DEMO during playback. Each time you press the button during normal playback, the display changes as follows: nPlaying time on the current track µ Remaining time on the current track µ Disc number of the current track and “PLAY” µ Clock display (for about 10 seconds) µ Effect name or “FLAT” µ Name of spectrum analyzer display pattern Tip The total playing time and the number of tracks on a CD are displ...

Эта инструкция также подходит к моделям:
Музыкальные центры - MHC-RXD3 (522.46 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории