Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
39 Timer-recording radio programs ....... 40 Optional AV components Connecting audio components .......... 41 Connecting a VCR ................................ 43 Connecting the surround speakers .... 43 Connecting outdoor antennas ............ 44 Additional Information Precautions ............................................ 45 Troubleshooting ................................... 46 Specifications ........................................ 49 Parts identification ............................... 54 Index ........................................ Back cover * European model only Using this manual The instructions in this manual are for MHC-GRX9900/GRX70/GRX70J/GRX50/R770/RXD9/ RXD80/RXD7. The MHC-RXD80 is the model used for illustration purposes. Otherwise, the model name is indicated in the illustrations. The shape of the buttons on the MHC-GRX9900/ RXD9 is different from that of the MHC-GRX70, but the locations of the buttons are the same. Any differences in operation are clearly indicated in the text, for example, “MHC-GRX70 only” or “Europearn model only”. MHC-GRX70/GRX70J/GRX50/R770/ MHC-GRX9900/RXD9 RXD80/RXD7 * * This part of the MHC-GRX50/R770/RXD7 is different from other models as below: MHC-GRX50/R770/RXD7 MHC-GRX70/GRX70J/RXD80 MHC-GRX9900/RXD9 EDIT DIRECTION TUNER MEMORY REPEAT STEREO/MONO EFFECT FILE SELECT GEQ CONTROL P FILE MEMORY PLAY MODE DOLBY NR PTY** FILE SELECT PLAY MODE DOLBY NR PTY** ** “PTY” is for European model only. EDIT DIRECTION TUNER MEMORY REPEAT STEREO/MONO Getting Started Step 1: Hooking up the system Do the following procedure 1 to 4 to hook up your system using the supplied cords and accessories. AM loop antenna 2431Front speaker (Left)Front speaker (Right) FM antenna 1 Connect the speakers. Connect the speaker cords of front speakers to the SPEAKER jacks as below. For the front speakers with jacks, connect the speaker cords to the speakers in the same way. Insert only the stripped portion. Notes • Keep the speaker cords away from the antennas to prevent noise. • The type of speakers supplied vary according to the model you purchased (see “Specifications” on page 52). continued Solid (O) R + L + – Black/ Stripe (O) Red/ Step 1: Hooking up the system 3 For models with a voltage selector, (continued) set VOLTAGE SELECTOR to position of your local power line 2 Connect the FM/AM antennas. voltage. Set up the AM loop antenna, then connect it. Jack type A Extend the FM lead antenna horizontally. AM loop antenna FM75 AM VOLTAGE SELECTOR 220V120V230 240V- 4 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press , the system turns on and the demonstration automatically ends. If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter). Jack type B Extend the FM lead antenna horizontally. FM75 AM COAXIAL AM loop antenna To connect optional AV components See page 41. To deactivate the demonstration When you set the time (Step 2: Setting the time), the demonstration is deactivated. To activate/deactivate the demonstration again, press DISPLAY (MHC-RXD9/RXD80/ RXD7/R770) or DEMO (STANDBY) (MHC-GRX9900/GRX70/GRX70J/GRX50) while the system is off. To attach the front speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Inserting two size AA (R6) batteries into the remote }} ] ] Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Hold down LOOP and press so that “LOCK” appears in the display. Step 2: Setting the time You must set the time before using the timer functions. The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24-hour system model is used for illustration purposes. 2,4 3,5 DISPLAY 1 1 Press CLOCK/TIMER SET. The hour indication flashes. 2 Turn the jog dial to set the hour. continued Step 2: Setting the time (coninued) 3 Press ENTER/NEXT. The minute indication flashes. 4 Turn the jog dial to set the minute. 5 Press ENTER/NEXT. The clock starts working. Tip If you’ve made a mistake, start over from step 1. To change the time The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER SET. 2 Turn the jog dial to select SET CLOCK. 3 Press ENTER/NEXT. 4 Perform steps 2 through 5 above. Note The clock settings are canceled when you disconnect the power cord or if a power failure occurs. Step 3: Presetting radio stations You can preset the following number of stations: – 2 band model:...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-GRX70 (723.43 kb)
Музыкальные центры - MHC-GRX70J (723.43 kb)
Музыкальные центры - MHC-GRX9900 (723.43 kb)
Музыкальные центры - MHC-R770 (723.43 kb)