Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
You can mute your unit, for example, to answer the telephone, the “MUTE” is displayed in the display window. Sleep Timer Setting Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. Note , • You can check the remaining time before the unit turns off. • Press SLEEP. The remaining time appears in the display window. Operating Auto Power Down This unit will be off itself to save electronic consumption in the case main unit is not connected to external device and is not used for 25 minutes. So does this unit after six hours since Main unit has been connected to other device using analog input. 12 Operating Radio Operations Listening to the radio 1. Press FUNCTION on the remote control or FUNC. on the unit until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUN. -/+ for about 2 seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. Or Press TUN. -/+ repeatedly. 3. Adjust the volume by rotating VOLUME on Improving poor FM reception Press d/M on the remote control. This will change the tuner from stereo to mono and usually improve the reception. Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using EQ. The displayed items for the Equalizer may be 3 Operating the unit or by pressing VOLUME W/S on the remote control repeatedly. Presetting the Radio Stations You can preset 50 stations for FM . Before tuning, make sure to turn down the volume. 1. Press FUNCTION on the remote control or FUNC. on the unit until FM appears in the display window. 2. Select the desired frequency by pressing TUN. -/+. 3. Press PROGRAM/MEMO a preset number will flash in the display window. 4. Press PRESET/FOLDER W/S to select the different depending on sound sources and effects. On Display Description POP CLASSIC ROCK JAZZ This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock pop, jazz or classic concert. BASS Reinforce the treble, bass and surround sound effect. BYPASS You can enjoy the sound without equalizer effect. preset number you want. 5. Press PROGRAM/MEMO The station is stored. 6. Repeat steps 2 to 5 to store other stations. 7. To listen a preset station, press PRESET/FOLDER W/S. Deleting all the saved stations 1. Press and hold PROGRAM/MEMO for two seconds. “CLEAR” will flash up on the unit display. 2. Press PROGRAM/MEMO to erase all saved radio stations. Note Maybe you need reset the surround mode, after switching the input, sometimes even after the sound track changed. , Operating 13 Advanced Operations Listening to music from your external device The unit can be used to play the music from many types of external device. (Refer to the page 9) 1. Connect the external device to the PORTABLE. IN connector of the unit. 2. Turn the power on by pressing 1/! (Power). 3. Select the PORTABLE function by pressing FUNCTION on the remote control or FUNC. on the unit. To select recording bit rate and speed 1. Press REC on the remote control or XREC on the unit for longer than 3 seconds. 2. Use Cc/vV on the remote control or Y/U on the unit to select the bit rate. 3. Press REC on the remote control or XREC on the unit again to select the recording speed. 4. Press Cc/vV on the remote control or Y/U on the unit to select a desired recording speed; (Only AUDIO CD). X1 SPEED -You can listen to music while recording it. X2 SPEED 3 -You can just record the music file. 4. Turn the external device and start it playing. 5. Press REC on the remote control or XREC on Recording to USB the unit to finish the setting. 6. To stop recording, press Z on the remote 1. Connect the USB device to the unit. control or I/PRE-on the unit. 2. Select a function by pressing FUNCTION on the remote control or FUNC. on the unit. One track recording - You can record to USB after playing a file you want. All tracks recording - You can record to USB after stop. Program list recording - After showing the programmed list, you can record it to USB. 3. Start the recording by pressing REC on the remote control or X REC on the unit. 4. To stop recording, press Z on the remote control or I/PRE-on the unit. Pausing recording During recording, press REC on the remote control or X REC on the unit to pause recording. Press it again to restart recording. (Only Radio, Portable) Operating 14 Operating 3 Operating yYou can check the recording percentage rate for the USB record on the display window during the recording. (MP3/ WMA CD Only) yDuring recording MP3/ WMA, there is no sound. yWhen you stop recording during playback, the file that has been recorded at that time will be stored. (AUDIO CD Only) ...