Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Let the bottom of the door frame swing gently in towards the fireplace ensuring that the gasket seats evenly as the door frame draws shut. Fasten the two latches located underneath the firebox floor to the door’s vee-flange. Close both the latches securely. Step 7. Reinstall the top radiant panel/hood assembly or hood and louver assembly. Make certain that the hood is installed as shown in Figure 3 (clean face models) or Figure 4 (louvered models). The fireplace must not be operated without the hood installed as shown in these figures. Step 8. Close the bottom radiant panel or louver assembly. NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinuance of colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © 2001 LENNOX HEARTH PRODUCTS P/N 750,021M REV. E 03/2008 1110 West Taft Avenue • Orange, CA 92865 ...
Эта инструкция также подходит к моделям:Камины - ADK22CMBS (116.16 kb)
Камины - ADK24CBS (116.16 kb)
Камины - ADK24CPB (116.16 kb)
Камины - ADK33CBS (116.16 kb)