Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Activating and deactivating TIMER . Press TIMER on the remote repeatedly to activate or deactivate the timer. . If activated, the last set source and star t time are displayed . If deactivated, “TIMER OFF” appears Helpful hints: The timer will not work at the set time if -the set is switched on - the timer is deactivated The set will switch to Tuner source automatically if : - no CD is inserted when the selected source is CD; - no USB device is connected when the selected source is USB SLEEP You can set a cer tain period of time after which the set will switch off. . On the remote control, press SLEEP repeatedly to select the desired time period options (in minutes): . Display shows in sequence: Sleep 90, 75, 60, 45, 30, 15 . Display shows the selected option briefly and returns to its previous status.The icon appears To deactivate the sleep timer, press SLEEP again . The icon disappears or Press STANDBY-ON/ ECO POWER to switch off the set (or y on the remote control) Helpful hints: – The SLEEP function does not affect your alarm time setting. 26 Specifications English AMPLIFIER Output power .......................................... 2 x 5 W RMS ............................................................ 10 W + 10 W MPO Signal-to-noise ratio ....................................... . 75 dBA Frequency response ........ 50 – 20,000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ..................................... . 4 . Impedance headphones .................... 32 . -1000 . ......................................................................................... <0.5W CD PLAYER Frequency range .................................. 30 – 18000 Hz Signal-to-noise ratio ............................................ 75 dBA TUNER FM wave range ................................... 87.5 – 108 MHz MW wave range ................................ 531 – 1602 kHz Number of presets ........................................................ 40 Antenna FM .................................................................... 75 . wire MW ......................................................... Loop antenna USB PLAYER USB ................................................................... 12Mb/s, V1.1 ......................................... suppor t MP3 and WMA files Number of albums/ folders ................ maximum 99 Number of tracks/titles ...................... maximum 999 SPEAKERS Bass reflex system Dimensions (w x h x d) .... 160 x 269 x 90 (mm) GENERAL INFORMATION AC Power ..................................... 220 – 240 V / 50 Hz Dimensions (w x h x d, with/without the stand) .................. 194 x 285 x 118/194 x 269 x 90 (mm) Weight(with/without speakers) ........... 3.8 / 2.2 kg Standby power consumption ............................ <5 W Eco power standby ........................................... <0.5 W Specifications and external appearance are subject to change without notice. Maintenance Cleaning the Cabinet Cleaning the disc lens . Use a soft cloth slightly moistened with a mild . After prolonged use, dir t or dust may detergent solution. Do not use a solution accumulate at the disc lens.To ensure good containing alcohol, spirits, ammonia or abrasives. playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available Cleaning Discs cleaner. Follow the instructions supplied with cleaner. . When a disc becomes dir ty, clean it with a cleaning cloth. Wipe the disc from the centre out. . Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. 27 Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution . Insert a disc. . Wait until the moisture condensation at the lens has cleared. . Replace or clean the disc, see “Maintenance”. . Use a finalised CD-RW or a correct MP3/WMA -CD format disc. . Check if the number of folders exceeds 99 or the number of titles exceeds 999 . If the signal is too weak, adjust the antenna or connect an external antenna for better reception. . Increase the distance between the Micro HiFi System and your TV or VCR. . Remove and reconnect the AC power plug and switch on the system again. . Adjust the volume. . Disconnect the headphones. . Check that the speakers are connected correctly. . Check if the stripped speaker wire is clamped. . Make sure the MP3-CD was recorded within 32~256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz. . Check the speaker connections and location. “NO DISC” is displayed. Some files on the USB device are not displayed. Radio reception is poor...