Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• The total number of files and folders on the disc should be less than 999. • Some discs may be incompatible due to a different recording format or the condition of disc. • Ensure that all the selected files have the “.jpg” extensions when copying into the CD layout. • If the files have “.jpe” or “.jpeg” extensions, please rename them as “.jpg” file. • File names without “.jpg” extension will not be able to be read by this DVD player. Even though the files are shown as JPEG image files in Windows Explorer. OPERATION 23 Operation with DivX Disc Operation with DivX Disc The unit can play the DivX files. 1 1 Insert a disc and close the tray. The DivX menu appears on the TV screen. List 0:00:00 MOVIE 1 / 12 Movie Folder 1 Movie Folder 2 Movie Folder 3 Movie Folder 4 Movie Folder 5 Movie Folder 6 Movie Folder 7 Movie Folder 8 2 22 Press / to select a folder, and press SELECT/ENTER to see the folder contents. ip If you are in a file list and want to return to the Folder list, use the / buttons on the remote control to highlight “ ” and press SELECT/ENTER to return to the previous menu screen. 3 3 If you want to view a particular file, press / to highlight a file and press SELECT/ENTER or PLAY. Playback starts. 4 4 Press STOP(x xx) to exit. otes • Be sure to select “SUBTITLE ON” mode by pressing the subtitle file every time before playing a DivX file . • When the subtile has more than two languages in the file, original subtile is only available. • The DivX files in your memory card can not be played. • The microphone does not work during playing a DivX file. • You can not adjust the sound mode and VIRTUAL sound during playing a DivX file. Notice for displaying the Divx subtitle If the subtitle does not display properly during playback, press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle is displayed properly. DivX disc compatibility with this player is limited as follows: • Available resolution size of the DivX file is under 720x576 (W x H) pixel. • The file name of the DivX subtitle is available by 20-40 characters (differs from language). • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark in the display. • If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. • If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. Playable DivX subtitle file • SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) Playable DivX file • ".avi ", ".mpg ", ".mpeg " Playable Codec format • "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". Playable Audio format • "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". -Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) -Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) 24 Operation with RADIO Operation with RADIO Presetting the radio stations You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned the volume down to the minimum level. 1 1 Press TUNER/BAND on the remote control to show either FM or AM in the display window. Or Press TUNER on the front panel. Every time you press this button, AM and FM changes alternately. 2 22Select a station you want by pressing TUNING (-/+) on the front panel or / on the remote control. otes • Automatic Tuning Press TUNING (-/+) or / for more than 0.5 second. -Scanning stops when the unit tunes in a station. • Manual Tuning Press TUNING (-/+) or / briefly and repeatedly. 3Press PROG./MEMO. on the remote control. A preset number will flash in the display window. 4Press / on the remote control to select the preset number you want. 5Press PROG./MEMO. again. The station is stored. 6Repeat steps 1 (or 2) to 5 to store other stations. To clear all memorized stations Press and hold PROG./MEMO. on the remote control for about two seconds, “ERASE ALL” appears in the display window and then press PROG./MEMO. on the remote control, the stations are cleared. For your reference If all stations have already been entered, “FULL” message will appear in the display window for a moment and then a preset number will flash. To change the preset number, follow the steps 4-5 . To recall preset numbers Press and hold / on the remote control until the desired preset number appears or press the button repeatedly. Listening to the radio 1 1 Press TUNER/BAND on the remote control to show either FM or AM in the display window. Or Press TUNER on the front panel. The last received station is tuned in. 2 22Press / on the remote control repeatedly to select the preset station you want. Each time you press this button, the unit tunes in the next preset station. 3Adjust the volume by rotating VOLUME CONTROL KNOB (or pressing VOLUME (-/+) on the remote control) repeatedly. To listen to non-preset radio stations • For manual tuning, see “Manual Tuning”. • For aut...