Оценок - 5, средний балл: 4.4
(
)
)
|
Фото и характеристики LG DKS-8000Q |
Фрагмент инструкции
First, remove the disc in the unit. Next, press and hold STOP on the remote control for five seconds. The video output will be restored to the standard setting, and a picture will be visible on your TV. 7 DVD Karaoke System KD300_7/1/08 9:33 AM Page 8 Adjust the audio settings Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect DIGITAL OUT jack to an amplifier or other equipment MPEG decoder. PCM : Select when connected to a two-channel DVDs encoded in Dolby Digital or MPEG two-channel PCM audio. 5.1 Speaker Setup - Adjust 5.1 Speaker Setup menu for amplifier’s output. [Speaker]: Select a speaker that you want to adjust. [Size]: Since the speaker settings are fixed, you cannot [Volume]: Adjust the output level of the selected speaker. (-5dB ~ 5dB) [Distance]: If you connected speakers to your DVD/CD setting the Distance lets the speakers know how far the sound has to set listening point. This allows the sound from each speaker to reach the listener at the same time. Press b / B to adjust the Distance of the selected speaker. (You can’t adjust front / Woofer speakers) [Test]: Press b / B to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal – Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. Adjust the lock settings To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers. If you forget your password you can reset it. Press SETUP to display the Setup menu. Input ‘210499’ and press ENTER. The password has now been cleared. Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. For rated discs, make sure to press ENTER after entering the password to enjoy it. Password – Sets or changes the password for lock settings. [New]: Enter a new 4-digit password using the numerical buttons then press ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password. Area code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 17. 8 DVD Karaoke System Adjust the others settings PBC (Playback Control) Playback control provides tures that are available on some DivX(R) Registration – We provide you with the DivX ® VOD (Video On Demand) registration code that allows the DivX ® VOD service. For more information, visit divx.com/vod. Press ENTER when [Select] icon is highlighted code of the unit. Semi Karaoke – When a chapter / title / track is fully finished ,this shows the score in the screen with a fanfare sound. Available discs for the Semi Karaoke function: DVD discs with more than 2 tracks [On]: When you finished singing a score will appear on the [Off]: Fanfare and score do not appears on the screen. - DVD, DVD Karaoke with more than 2 tracks - This function operate on the DVD/CD mode. - The Semi Karaoke function is available only when a microphone is - In case that a fanfare or score appears when a chapter of a movie file is changed during playback, set the Semi Karaoke to Off at the setup menu or disconnect the microphone. Bit Rate – Higher bit rates provides better sound quality, but require more storage space for the same length of audio. You can select 96kbps or 128kbps on recording. SSR (Real Time Score) – This function will be shown the Score to real time by checking interval and beat during sing a song in the karaoke mode only. Select the [On] : Score bar shows 41 level while checking the interval and beat. Select the [Off] : Score bar are not display on the screen. KD300_7/1/08 9:33 AM Page 9 VSM (VIRTUAL SOUND MATRIX) and Dolby Pro You can select the Dolby sound. Press VSM tual sound or to change sound [BYPASS] mode: Software with multichannel according to the way it was recorded. 2Ch source [PL II MOVIE] mode: The Movie mode is for use with stereo television and all programs encoded in Dolby Surround. The result is enhanced sound field directionality that approaches the quality [PL II MUSIC] mode: The Music mode is for use with any stereo music recordings. [PL II MATRIX] mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem “larger.” The Matrix mode may also find use in auto systems, where the fluctuations from poor reception can otherwise cause disturbing surround signals from decoder. The ultimate “cure” for poor FM stereo reception may be simply to force the...