Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
II PAUSE – Pauses play. To resume play, press again. M/W~ – Rewinds/fast forwards. To stop the winding, press n\A. When the end of a tape is reached, press WA to release U,w. The OPEVBATT/DIR indicator – Indicates the playback side. U: The side facing out (front side) is played. D: The back side is played. REVERSE MODE – Selects reverse mode. ~ G (pressed): Plays both sides of the tape once, Play stops at the end of the reverse side. 1~=) (released): Plays both sides repeatedly. DIR – Changes play side. -)57=D-ED371 W= STOP/EJECT – Stops play. The power will be automatically turned off. II PAUSE – Pauses play. To resume play, press again. > RE\MIND/+ F FWD – Rewinds/fast forwards. To stop winding, press n/4. ! 6 ENGLISH Insert a tape with the side to be recorded facing out. Get ready to record from the source. To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO/ BAND and tune to a station. NOTE (CSD-ED67 only) Make sure that ~ of the OPE/BATT/DIR indicator is on. If it is not on, press DIR to turn it on. Press l REC to start recording, 4* PLAY or 4 PLAY is pressed simultaneously. When the selected function is CD, CD play and recording starts simultaneously, For CSD-ED67, REVERSE MODE is also pressed simultaneously. At the end of the tape, it reverses to the back side although recording stops (the deck enters play mode). Press WA STOP/EJECT to stop the tape and press n STOP/MEMORY to stop CD play. To record only the selected tracks of a CD 1 Follow steps 1 to 3 of PROGRAMMED PLAY on page 5 to program tracks. 2 Press l REC. To stop recording, press WA STOP/EJECT. When recording from a CD, play pauses. To stop CD play, press W STOP/MEMORY. To pause recording, press II PAUSE. To resume recording, press again. To erase recording, press l REC while the power is off. After recording, press POWER (!) STANDBY to turn the power off. To prevent accidental erasure Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording. To record on the tape again Cover the tab openings with adhesive tape, etc. Side A “OO(! ~ \ m 4 Tab for side A ENGLISH 7 ,,-,====4==,4 LL—’716 REPEAT/FM M“DE/ \\..——— ,— “’c Iml=ra T \ 3-MODE EQUALIZER — Y T-BASS ~ QSOUND VOLUME Press VOLUME A or V. The volume level is displayed as a number from O to MAX (25). The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. To display the volume level when a function other than TAPE function is selected Press VOLUME A or V. The volume level is displayed for 4 seconds. DISPLAY on the remote control is also available (except CSD-ED37). 3-MODE EQUALIZER Press * 3-MODE EQUALIZER until one of the indicators lights up. The equalizer mode changes to ROCK, POP, JAZZ or no equalization, cyclically. ROCK -Emphasizes the high and low range of music. POP -Emphasizes voice and midrange of music. JAZZ -Emphasizes the low range of music. * or EQ on the remote control (except CSD-ED37) T-BASS system The T-BASS system enhances the realism of low- frequency sound. Press T-BASS and the T-BASS indicator lights up. QSOUND system This system provides a rich, three dimensional sound area for stereo sources. You can enjoy more enhanced sound. Press QSOUND and the QSOUND indicator lights up. At higher volumes, turning QSOUND on may cause sound distortion. In this case, make the volume down. To listen with the headphones Connect headphones with a stereo mini plug to the 0 jack. 8 ENGLISH STOP/MEMORY ~ ,4 m, w The unit can be turned off automatically at a specified time. While CD function is selected, operate the following procedures in stop mode. 1 Press REPEAT/FM MODE/OSC ~ while pressing STOP/MEMORY 13’HW. If STOP/MEMORY is kept pressed, another operation may start. 2 Within 4 seconds, press l++ or M to specify the time until the power is turned off. Each time it is pressed, the time changes between 10 and 90 minutes in 10-minute steps. Specified time While the sleep timer works, the dot keeps flashing. To check the time remaining until the power is turned off Repeat step 1 shown above. The remaining time is displayed for 4 seconds. To cancel the sleep timer Display the remaining time and press K or ~ repeatedly until OFF is displayed. NOTE If the unit is turned off during tape playback, <-or 4 on the deck will not be released. Press W= to release l > or 4. If an erroneous display or malfunction occurs Make sure that none of the deck operation buttons is pressed. Press n while pressing POWER 0 STANDBY. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. Maintenance To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or thinner. To clean the heads When the tape heads are dirty; -high frequency sound is not emitted -the sound is n...
Эта инструкция также подходит к моделям:Музыкальные центры - CSD-ED 37 (3.23 mb)
Музыкальные центры - CSD-ED67 (3.23 mb)