Select a track with 144 or a>1. C : All tracks are played repeatedly. * or REPEAT on the remote control (except CSD-ED37) To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function). If you load a disc while the CD indicator flashes in step 2, play starts without pressing -11. REPEAT -PLAY H+, m n STOP To select a track directly with the remote control (except CSD-ED37), press the numbered buttons O-9 and +1 O. CD play starts from the selected track and continues to the last track. Example: To select number 25, press +10, +10 and 5. To select number 10, press +10 and O. After listening, press POWER (!) STANDBY to turn the power off. NOTE Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions. Do not place more than one disc in the disc compartment. Do not try to open the disc compartment during play. Do not touch the lens. Doing so may cause malfunctions. Up to 30 tracks can be programmed from the disc. ~ In stop mode, keep’= STOP/MEMORY pressed until “M” flashes in the display. ‘ or n on the remote control (except CSD-ED37) 2 Press W, >>1 to select a track, then press H STOP/MEMORY to store it. Track number Programmed number To select a track with the remote control (except CSD-ED37) Press the numbered buttons O-9 and +1 O. 3 Repeat step 2 to program other tracks. 4 Press -II to start play. To check the program, press ~< or ~ in stop mode. To clear the program, press n once in stop mode so that “M” disappears in the display. To change the programmed tracks, clear the program and repeat all the steps again. ENGLISH 5 POWER(!) STANDBY/TAPE —% OPE/BATT/DIR (CSD-ED67 only) Jse Type I (normal) tapes only. XD-ED67 plays the both sides of the tape. >SD-ED57/CSD-ED37 plays the side facing out. %ess W4 STOP/EJECT to open the cassette holder md insert a tape with the exposed side up. ‘ush the cassette holder to close. CSD-ED67 DIR STOP/EJECT PLAY RE\MIND/+ F FWD – Rewinds/fast forwards. To stop winding, press n/4. ! 6 ENGLISH Insert a tape with the side to be recorded facing out. Get ready to record from the source. To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO/ BAND and tune to a station. NOTE (CSD-ED67 only) Make sure that ~ of the OPE/BATT/DIR indicator is on. If it is not on, press DIR to turn it on. Press l REC to start recording, 4* PLAY or 4 PLAY is pressed simultaneously. When the selected function is CD, CD play and recording starts simultaneously, For CSD-ED67, REVERSE MODE is also pressed simultaneously. At the end of the tape, it reverses to the back side although recording stops (the deck enters play mode). Press WA STOP/EJECT to stop the tape and press n STOP/MEMORY to stop CD play. To record only the selected tracks of a CD 1 Follow steps 1 to 3 of PROGRAMMED PLAY on page 5 to program tracks. 2 Press l REC. To stop recording, press WA STOP/EJECT. When recording from a CD, play pauses. To stop CD play, press W STOP/MEMORY. To pause recording, press II PAUSE. To resume recording, press again. To erase recording, press l REC while the power is off. After recording, press POWER (!) STANDBY to turn the power off. To prevent accidental erasure Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording. To record on the tape again Cover the tab openings with adhesive tape, etc. Side A “OO(! ~ \ m 4 Tab for side A ENGLISH 7 ,,-,====4==,4 LL—’716 REPEAT/FM M“DE/ \\..——— ,— “’c Iml=ra T \ 3-MODE EQUALIZER — Y T-BASS ~ QSOUND VOLUME Press VOLUME A or V. The volume level is displayed as a number from O to MAX (25). The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. To display the volume level when a function other than TAPE function is selected Press VOLUME A or V. The volume level is displayed for 4 seconds. DISPLAY on the remote control is also available (except CSD-ED37). 3-MODE EQUALIZER Press * 3-MODE EQUALIZER until one of the indicators lights u...
)
