Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
D-91054 Erlangen . Tel. +49(0) 1805/059595 . FAX +49(0) 09131/51683 . . info@clearaudio.de /clearaudio copyright . 2012 Version-1.2_12-09-17_E Dear clearaudio-customer, You have purchased a state-of-the-art turntable, the Ovation, a world class product of clearaudio electronic GmbH. Congratulations on your purchase! With the Ovation turntable, clearaudio made use of the OSC (Optical-Speed-Control) technology found in the Innovation turntables series by implanting it into a precision milled Panzerholz (bullet proof wood) chassis. This chassis is combined with an anti – resonance mat that is capable of absorbing a huge amount of energy. This is due to the use of more than 100,000 small stainless steel balls which absorb unwanted resonance. Thus, the turntable combines the latest technology and innovation in a classic design, at a perfect price/performance ratio. Please read this user manual carefully so that you can enjoy all the advantages of your Ovation-turntable. All information given will help to generate the best performance and avoid any possible damages. We hope you will enjoy your new clearaudio Ovation -turntable. clearaudio electronic GmbH Please read the warnings before connecting your Ovation -turntable to the mains supply. CE-MARKING WARNINGS Don’t expose your turntable to rain or humidity. Don’t handle the mains leads with wet hands. Don’t place or insert anything into the equipment or through ventilation holes. No naked flame sources, such as lighted candles, should be placed on the equipment. The clearaudio Ovation meets the regulations concerning electromagnetic disturbance (EMC) and low-voltage appliances. COPYRIGHT Recording und reproduction of any sound-material may require the consent of the creator. Please acknowledge the information given in the - Copyright Act 1956, - Dramatic and Musical Performers Act 1958, - Performers Protection Acts 1963 and 1072, - any more recent legal regulations. User manual 1 – 14 Contents 1. Packaging overview 4 2. Set-up and operation 5 3. Service 11 4. Special directions 12 5. Technical data 13 Warranty information 14 1. Packaging overview The clearaudio Ovation-turntable is delivered in specially designed custom packaging. Please check the contents according to the following list before you set up your new clearaudio Ovation -turntable. 1. Layer (top): Top of bearing, belt, fittings and accessories (Quality and warranty card, bearing oil) If ordered as set: tonearm and/or pickup 2. Layer (middle): Turntable - chassis 3. Layer (bottom): Platter, aluminium sub-platter 2. Set-up and operation The Ovation -turntable consists of several components, as described in No 1 (Packing overview). The set up is easy, as some of the components are pre-assembled at the factory. Please make use of the white gloves enclosed in order to avoid scratches or unwanted fingerprints (e.g on the platter). Please follow the instructions step by step: The Ovation requires a space of at least 16.54 inch x 13.78 inch for positioning. 13,78 inch / 350 mm 16,54 inch / 420 mm Pic. 1: Setting up space 2.1 Place the pre-mounted chassis on your hifi-rack or another suitable surface. Pic. 2: Ovation chassis 2.2 Please remove the protective seal from the bearing shaft and place two drops of the synthetic bearing oil on the ceramic bearing shaft. Slip the bearing top onto the bearing shaft of the turntable. Pic. 3: Bearing oil 2.3 Now you can set the bearing upper part carefully onto the bearing. To avoid damages make sure you slide the bearing upper part slowly and carefully on the polished ceramic shaft. Pic. 4: Fitting the bearing upper part 2.4 Now you can set the sub-platter carefully onto the bearing. First remove the security mat on the backside of the sub-platter (security tape for OSC - graduated collar (Optical Speed Control)). To avoid any damage, make sure you slide the sub-platter slowly and carefully onto the bearing. After that, take the included belt and place it around the motor and the sub-platter. At this point the sub-platter will be higher than the pulley. This is normal, as the CMB requires the weight of the platter to fully engage it. Pic. 5.1: Moving the belt Pic. 5: Setting the sub-platter Please note: The marks (dots) on the sub-platter and the top of the bearing have been carefully measured. Please make sure they align exactly as shown in picture below: Pic. 6: Congruence of sub-platter and bearing markings 2.5 Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the platter slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the platter does not slip or fall on your turntable. Pic. 7: Setting the platter onto the bearing 2.6 Please check with the bubble level gauge, if your Innovation turntable is in a level position. You can adjust each of the turntable’s feet to get the turntable level. Only if the turntable is in a level position will you get the bes...