For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. ZIFS360NXRH, Freezer Handle on the left side, the door swings left to right. ZIFS360NXLH, Freezer Handle on the right side, the door swings right to left. Caution These units are top-heavy and must be secured to prevent the possibility of tipping forward. Anti-Tip protection is required. The water and electrical supply must be located as shown. The f

Order ZUGPP2 Professional Unified Grille Panel Kit for one continuous grille panel. ZUGPP2: For side-by-side installation of two professional models. This kit provides a unified stainless steel grille panel to span the width of two units. For a complete food storage center, install a Monogram All-Refrigerator and All Freezer side-by-side. For even more capacity, install two refrigerators or two freezers. 5" For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website

Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width. • The water and electrical locations for each product must be located as shown. • A separate 115V, 60Hz., 15 or 20 amp power supply is recommended for each product. 25" Min. to Wall 0" 25" Min. to Wall130.Door Swing 130.Door Swing Clearances for Multiple Single Door Installations In a side-by-side installation of a left and right door swing product, the

to 84-1/2" max. height. Note: the top case trim at the front is 1/2" higher and will overlap upper cabinetry or soffit. Use leveling legs and wheels for a maximum 1" height adjustment. Product Clearances These units are equipped with a 2-position door stop. The factory set 130. door swing can be adjusted to 90. if clearance to adjacent cabinets or walls is restricted. Order WX14X99 door stop for precise settings between 90.and 130.. 25" Minimum to Wall 130.Door Swing 90.Door Swing 23-7/8" Behind

• Side panels are required whenever the sides of the product are exposed. • Side panel sizes vary depending on the type of installation being made. To accomplish an attractive installation, you must: 1. Determine the need for side panels. 2. Determine side panel thickness. 3. Order matching side panels from the cabinet manufacturer. Be sure to provide the exact dimensions. Monogram built-in refrigerators and freezers can be installed flush with typical 24-3/4" deep cabinetry. When installed semi

Plasticized fin coil and air circulating fans are contained within a concealed “plug” type insulated housing, readily accessible on the top of the cabinet and separate from the food zone to increase food storage capacity. The entire “plug” system is fully charged with refrigerant and mounted on a sturdy steel, rail-type base which can be easily removed if refrigerator conversion is desired. Freezers are designed to maintain 0 degrees Fahrenheit (-18° Centigrade) while operating with an unrestric

The cabinet front and doors are constructed of heavy-gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor tight. Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminates overlapping panels with raw edges. Cabinet body and doors are insulated with non-CFC, foamed- in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length lo

Plasticized fin coil and air circulating fans are contained within a concealed “plug” type insulated housing, readily accessible on the top of the cabinet and separate from the food zone to increase food storage capacity. The entire “plug” system is fully charged with environmentally safe R-404A refrigerant and mounted on a sturdy steel, rail type base, which can be easily removed if refrigerator conversion is desired. Freezers are designed to maintain 0° Fahrenheit (-18° Centigrade) while opera

FREEZERS FREEZERS SPECIFICATIONS DL1FI-SS-E DL2FI-SS-E DL3FI-SS-E DIMENSIONAL DATA ROLL-IN ROLL-IN ROLL-IN Net Capacity (cu. ft.) 34 68 102 Width, Overall (in.) 351/4 681/2 1013/4 Depth, Overall, Incl. Hdls.(in.) 351/2 351/2 351/2 Depth (Less Door(s))(in.) 32 32 32 Depth(Door(s) Open 90°)(in.) 65 65 65 Clear Door Width(in.) 273/8 273/8 273/8 Clear Full-Door Height (in.) 721/2 721/2 721/2 Height, Overall (in.) 92 92 94 No. of Full Door(s) 1 2 3 Rack Capacity* 1 2 3 REFRIGERATION DATA Condensing U

FREEZERS ROLL-IN FREEZERS EXTENDED HEIGHT (72" CART CAPACITY) Utilizing Environmentally Safe, CFC-free R-404A Refrigerant DL1FI-SS-E DL3FI-SS-E DL2FI-SS-E Standard (S/S Front, Aluminum Ends & Interior) Suffix SA (S/S Exterior, Aluminum Interior) Suffix SS (S/S Exterior & Interior) Standard Features •Modern, State-Of-The-Art Styling •Performance Rated, “Plug” Refrigeration System Utilizing Environmentally Safe R-404A Refrigerant •3" High Density, Non-CFC Polyurethane Foam Insulation •Chrome-Plate