2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. Configuring PC (WindowsXP) 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection. ENGLISH 3. In

Reset After the device has turned on, press it to reset the device or restore to factory default settings. The operation is as below: 0-3 seconds: reset the device 3-6 seconds: no action 10 seconds or above: restore to factory default settings (this is used when you can not login to the router, e.g. forgot the password) POWER (jack) Connect the supplied power adapter to this jack. POWER Switch A Power ON/OFF switch ENGLISH 1.4 Cabling ENGLISH 1.4 Cabling First you must connect the product to the

Moreover, it concurs a communication in upstream until 48Kbps. Thanks to the V.44 protocol, it improves the data compression until to 30%, diminishing the times of wait. Italian software allows to manage the modem like a digital answer phone. It could be also used as a real telephone / fax. ^ Internet connection with V.92 technology ^ G3 fax up to 14.400bps ^ “Hot” Plug&Play ^ Easy installation and use Company certified ISO 9001:2000 Web Runner USB V.90/V.92 modem 56K A01-PU1 Technical F

5. If you want to exit the OSD image, select the “exit function/EXIT OSD”, or leave the monitor alone for 20 seconds (Windows default), the OSD window will close and sure automatically. 6. When the OSD window is active, it shows the input signal timing. 3.3 Adjusting the picture 1. BRIGHTNESS 1.1 Auto gain control: Adjust the gain automatically. 1.2 Brightness: Adjust the brightness automatically. 1.3 Contrast: Adjust the contrast automatically. 1.4 Exit 2. COLOR (In the state of DVI without thi

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can

Panel of elevated quality with high contrast and good brightness and response time. Active loudspeakers for an high quality audio signal. DVI digital input for a better image quality. Pivot Function enables the computer display to be rotated from landscape to portrait, making word documents more easy to manage. feu PIXEL k TLANTIS /1 : I *j where solutions begin TECHNICAL FEATURES: Type: -LCD monitor 19 Panel: -Viewable Area: 376.320 x 301.056 mm -Type: TFT -Pixel Pitch: 0,294 mm -Reso

VESA/70 1024.768 56.5 70 Non-interlaced 9. VESA/75 1024.768 60.0 75 Non-interlaced 10. VESA/60 1280.1024 64.0 60 Non-interlaced 11. VESA/75 1280.1024 80.0 75 Non-interlaced 7 Signal Connector Pin-outs To connect VGA, 8514A or IBM-compatible graphics adapters, use a 15 pin mini D-type male connector. A05-17AM-D01 - A05-17BM-D03 - A05-19BM-D02_X02 9 - 40 ENGLISH 7.1 15-pin Mini D-type Male VGA Connector 1 Red Video 6 Red Ground 11 Ground 2 Green Video 7 Green Ground 12 Serial Data/I/O 3 Blue Video

.... 45 4. Specifications.............................................................................................................. .................... 46 5. Disfonctionnement ........................................................................................................... ............... 48 Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to cha

then connect the AC adapter output to the power input of the monitor. 3. Audio cable connection: Insert one end of the audio cable to the audio output of the PC audio card and the another to the audio input of LCD monitor. 4. Power on: turn on both of the monitor and computer. After the monitor is power on, the LED lights up green or blue, If the LED become red and flashing, please check the video signal cable. If LED is off, please press power on switch. A05- 1XAX- C0X_ MX02 ENGLISH 2.3Selftest