Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
5. If you want to exit the OSD image, select the “exit function/EXIT OSD”, or leave the monitor alone for 20 seconds (Windows default), the OSD window will close and sure automatically. 6. When the OSD window is active, it shows the input signal timing. 3.3 Adjusting the picture 1. BRIGHTNESS 1.1 Auto gain control: Adjust the gain automatically. 1.2 Brightness: Adjust the brightness automatically. 1.3 Contrast: Adjust the contrast automatically. 1.4 Exit 2. COLOR (In the state of DVI without this item) 2.1 Auto color: Adjust the color automatically. 2.2 Exit A05-17AM-L02_MX01 3. IMAGE (In the state of DVI without this item) 3.1 Auto configuration: Adjust the image position automatically 3.2 Clock: Adjust the image clock. 3.3 Phase: Adjust the image focus 3.4 H-Position: Adjust the image horizontal position 3.5 V-Position: Adjust the image vertical position. 3.6 Exit 4. TOOLS 4.1 OSD Timeout: Control the quit time of quit the OSD menu automatically. 4.2 OSD H-Position: Adjust the horizontal position of OSD menu. 4.3 OSD V.-Position: Adjust the vertical position of OSD menu. 4.4 Volume(with the function of audio frequency): Adjust the volume of the speaker. 4.5 Factory reset: Recall to factory setting 4.6 Exit 5. COLOR TEMP: selection 5000k warm, 6500k standard, 9300k cool. If 5000k,6500k,9300k can’t meet your need, you can use USERDEFINED menu to adjust the red , green and blue to gain the color which you like. 6. LANGUAGE: Choose the language of OSD menu, you can choose English .Czech.Russia.German.Polish etc. 7. ANALOG/DIGITAL (with the function of DVI): Select the right input. 8. EXIT: Exit OSD menu. 4.0 Trouble-Shooting Problem & Question Possible Solution Power LED is not on Check if the Power Switch is in the ON position Power Cord should be connected No Plug & Play Check if the PC system is Plug & Play A05-17AM-L02_MX01 compatible Check if the Video Card is Plug & Play compatible Check if the D-15 plug pin of Video Cable is bent Picture is fuzzy Adjust the Contrast and Brightness Controls. Picture bounces or a wave pattern is present in the picture Move electrical devices that may cause electrical interference. The power LED is Computer Power Switch should be in the ON(Red) but there's no ON position. video or no picture. Computer Video Card should be snugly seated in its slot Make sure monitor's video cable is properly connected to the computer. Inspect monitor's video cable and rnake sure none of the pins are bent. Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. Missing one of the primary colors(RED,GREEN,or BLUE) Inspect the monitor's video cable and make sure that none of the pins are bent. Screen image is not centered or sized properly. Adjust pixel frequency(CLOCK) and PHASE or press hot-key (AUTO) Picture has color defects (white does not look white) Adjust RGB color or select color temperature Poor brightness or The life time of the back-light is limited. In 30000 Hours the luminance of the light has A05-17AM-L02_MX01 contrast been reduced to half of its original value. Please send the monitor to an authorized service Agent for service. Horizontal or vertical disturbances on the screen Use win 95/98/2000/XP shut-down mode Adjust CLOCK and PHASE or perform hot- key(AUTO-key). APPENDIX A: SPECIFICATIONS Model A05-17AM-L02 Panel 17” Resolution 1280 x 1024 Active area 337.920 x 270.336 mm Pixel pitch 0.264 mm Contrast 500:1 Brightness 300 cd/m2 Response time 8 ms Display colors 16.7 M Viewing angle H: -75°/+75°, V: -75°/+60° H-Frequency 30~81 KHz V-Frequency 55~75 Hz Plug & Play Yes Input signal Analog Video Input connector 15 pins D-Sub Audio input connector 1 Stereo input Built-in speakers 2 x 2 W Power input connector Power jack Maximum power cons. <40 W Stand-by power cons. <5 W Off mode powert cons. <3 W Power supply for adapter 100 V~240 VAC 60/50Hz Power supply for monitor 12 VDC 4 A Power saving control Yes Norms CE Storage temperature -20°C~+55°C Operating temperature 5°C~40°C Humidity 10%~85% A05-17AM-L02_MX01 APPENDIX B: TIMING TABLE STANDARD RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY VGA 720.400 31.47 kHz 70.00 Hz 640.480 31.469 kHz 60.00 Hz 640.480 37.861 kHz 72.00 Hz 640.480 37.5 kHz 75.00 Hz SVGA 800.600 35.156 kHz 56.00 Hz 800.600 37.879 kHz 60.00 Hz 800.600 48.077 kHz 72.00 Hz 800.600 46.875 kHz 75.00 Hz XGA 1024.768 48.363 kHz 60.00 Hz 1024.768 56.476 kHz 70.00 Hz 1024.768 60.023 kHz 75.00 Hz SXGA 1280.1024 63.981KHz 60.020Hz 1280.1024 79.976KHz 75.025Hz APPENDIX C: RESOLUTION TABLE RESOLUTION VERTICAL FREQUENCY RESOLUTION VERTICAL FREQUENCY 640.480 60Hz 800.600 75Hz 720.400 70Hz 1024.768 60Hz 640.480 72Hz 1024.768 70Hz 640.480 75Hz 1024.768 75Hz 800.600 56Hz 1280.1024 60Hz 800.600 60Hz 1280.1024 75Hz 800.600 72hz A05-17AM-L02_MX01 APPENDIX D: D-SUB CABLE PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Ground 3. Blue 11...