Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
The switch uses this information to initialize the keyboard and mouse interfaces of the servers. If the servers are turned on before the switch, the servers may exhibit abnormal or erratic behavior. To power up the OutLook switch system: 1. Turn on the monitors. 2. Turn on the primary switch. 3. Turn on the servers attached to the primary switch. 4. Turn on the secondary switch (if applicable). 5. Turn on the servers attached to the secondary switch (if applicable). Checking the OutLook switch system startup behavior During system startup, check to see that your primary OutLook switch does the following: • Lights the blue LED power indicator on the front of the switch (if applicable) • Identifies the mouse and keyboard and sets their default states • Displays copyright information about the OutLook switch and firmware • Selects a port and displays its number in the status flag on the monitor See the following table for the default port number that displays in the status flag on startup for each of the OutLook switch models. Default Port Number Displayed in Status Flag OutLook Model User Displays Port 140ES, 180ES, 1160ES A 1 280ES, 2160ES A 1 B 2 4160ES A 1 B 2 C 3 D 4 If the copyright information and status flag do not appear, check that the monitor is connected and powered up. 3 Basic Operations Contents Viewing and Selecting Ports and Servers...........21 OSCAR Navigation Basics ......................23 Setting up OSCAR.............................24 Using Snapshot...............................34 Resetting your Keyboard and Mouse..............34 Displaying Version Information..................35 Sending the Print Screen Keystroke...............35 Chapter 3: Basic Operations 21 Chapter 3: Basic Operations Viewing and Selecting Ports and Servers Use the Main dialog box to select, control and configure servers in your OutLook system. To access the Main dialog box: Press Print Screen to start OSCAR and gain access to the Main dialog box. Avocent Main i?|[Xl 2j Name Port © alphaseruer 1 О Renote seruer 2 2 Ä EnailSystem 3 X QualityControl A о Release-Seruer 5 о fl Test PC Ё X Lab-1 7-2 i?) В Lab-2 7-3 о°о Setup Connands Figure 3.1: Main Dialog Box Viewing the Status of your Switch System The status of servers and switches in your system is indicated in the far right column of the Main dialog box. The following table describes the status symbols. OSCAR Status Symbols Symbol Description О Server connected and powered up. X Connected server is powered down or is not operating properly. А Secondary switch connected and powered up. & Secondary switch is powered down or is not operating properly. On a multiuser switch, this letter corresponds to the lettered user port to which you are connected. в On a multiuser switch, this letter identifies the user currently connected to the server. 22 OutLook ES Series Installer/User Guide Selecting Servers Use the Main dialog box to select servers. When you select a server, the OutLook switch reconfigures the keyboard and mouse to the settings for the selected server. To select servers: 1. Double-click the server name or port number. - or - If the display order is by port, type the port number and press Enter. - or - If the display order is by name, type the first few letters of the name of the server to establish it as unique and press Enter. To select the previous server: Press Print Screen and then Backspace. This key combination toggles you between the previous and current connection. To disengage from a server: Press Print Screen, then Alt+0. This key combination leaves you in a free state with no server selected. The status flag on your desktop displays Free. Soft Switching After you press Print Screen to initially open OSCAR, you can select servers without displaying OSCAR. This is called a soft switch. To configure servers for selecting without displaying OSCAR: 1. Click Setup - Menu. 2. For Delay Time, type the number of seconds of delay desired before the Main dialog box is displayed after Print Screen is pressed. 3. Click OK. To select servers without displaying OSCAR: 1. To select another server, press Print Screen. If the display order of your server list is by port (Port button is depressed), type the port number and press Enter. - or - If the servers are in name order (Name button is depressed), type the first few letters of the name of the server to establish it as unique and press Enter. If the selection is performed before the Delay Time has expired, OSCAR does not display. 2. To switch back to the previous server, press Print Screen then Backspace. Chapter 3: Basic Operations 23 OSCAR Navigation Basics Use the following keystrokes to navigate though OSCAR. This Keystroke Does This Print Screen Opens OSCAR. (To print a screen, see Sending the Print Screen Keystroke in Chapter 3.) F1 Opens the Help screen for the current dialog box. Escape Closes the current dial...
Эта инструкция также подходит к моделям:Мониторы - 2160ES (1.36 mb)
Мониторы - 280ES (1.36 mb)
Мониторы - 4160ES (1.36 mb)
Мониторы - 1160ES (1.36 mb)