Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Mount components beginning at the bottom of the rack, then work to the top. Do not exceed your rack load rating. 10 OutLook ES Series Installer/User Guide CAUTION Power Considerations: Connect only to the power source specified on the unit. When multiple electrical components are installed in a rack, assure the total component power ratings do not exceed circuit capabilities. Overloaded power sources and extension cords present fire and shock hazards. To install the switch mounting bracket: 1. Line up the holes in the “long side” of the kit’s side brackets with the screw holes in the switch. 2. With an Allen wrench, fasten the mounting brackets to the switch using two #8-32 button head socket cap screws on each side. 3. Attach the six rack nut/holders to the mounting rail of the rack so that the nut is positioned on the inside of the rack. 4. Mount the switch assembly to the rack by matching the holes in the “short side” of each bracket to an appropriate set of matching holes on your equipment rack, then inserting #10-32 Phillips screws through the slots in the bracket and the holes in the mounting rail and then into the rack/nut holders. Figure 2.1: Rack Mounting Diagram Chapter 2: Installation 11 Installing a 4- or 8-Port Switch (140ES, 180ES and 280ES models) The diagram below illustrates one possible configuration for your 4- or 8-port switch. Follow the step-by-step instructions to properly install your new OutLook switch. Server 1 Figure 2.2: 8-Port Installation Example WARNING: To reduce the risk of electric shock or damage to your equipment: - Do not disable the power cord grounding plug. The grounding plug is an important safety feature. - Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times. - Disconnect the power from the unit by unplugging the power cord from either the electrical outlet or the unit. 12 OutLook ES Series Installer/User Guide To install a 4- or 8-port switch: 1. Prepare the location for the switch. See Rack Mounting your OutLook ES Unit in this chapter if you are rack mounting the unit. 2. Select cables with appropriate connectors and length. (See Appendix B for cable specifications.) NOTE: Cable length affects video quality as well as keyboard and mouse data timing. The maximum cable length is determined in part by the computer and peripherals used. Not all systems will give satisfactory results at the maximum length. 3. Connect the mouse, video and keyboard cables to the appropriate switch connectors. Note that all keyboard and mouse cables are 6-pin miniDIN PS/2 style and all the video cables are 15-pin VGA/SVGA style. (These connectors are located on the left rear of the switch unit, with additional connectors on the front of the OutLook 280 unit.) NOTE: Keyboard and mouse connectors on the OutLook switch work with cables that have a locking mechanism. The cable lock prevents cables from becoming disconnected from the switch connectors due to the weight of the cable bundles or accidental tension from handling cables. 4. Select the computer that is to be connected to Port 1. Attach the computer’s mouse to the appropriate connector on Port 1. Attach the computer’s monitor to the 15-pin VGA connector. Attach the computer’s keyboard to the appropriate connector. Bundle and label the cables for easy identification. 5. Repeat step 4 for all remaining computers to be connected to the switch unit. 6. Connect the power cord to the switch unit. Chapter 2: Installation 13 Installing a 16-Port Switch (1160ES, 2160ES and 4160ES models) The diagram below illustrates one possible configuration for your 16-port switch. Follow the step-by-step instructions to properly install your new OutLook switch. Figure 2.3: 16-Port Installation Example WARNING: To reduce the risk of electric shock or damage to your equipment: - Do not disable the power cord grounding plug. The grounding plug is an important safety feature. - Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times. - Disconnect the power from the unit by unplugging the power cord from either the electrical outlet or the unit. 14 OutLook ES Series Installer/User Guide To install a 16-port switch: 1. Prepare the location for the switch. See Rack Mounting your OutLook ES Unit in this chapter if you are rack mounting the unit. 2. Select cables with appropriate connectors and length. (See Appendix B for specifications.) All 16-port switches require one high density 50-pin for every two computer cable sets of keyboard, video and mouse connectors. 3. Connect the high-density cable to the appropriate port on the back of the switch. You will note that each 50-pin connector is labeled with two numbers and symbols. The symbols help you determine the switch port number of the two keyboard, video and mouse cable sets. NOTE: Cable length affects video quality as well as keyboard and mouse data timing. The maximum cable length is...
Эта инструкция также подходит к моделям:Мониторы - 180ES (1.36 mb)
Мониторы - 280ES (1.36 mb)
Мониторы - 4160ES (1.36 mb)
Мониторы - 1160ES (1.36 mb)