Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Мониторы - 25UM65-P (6.04 mb)
Мониторы - 25UM65-P (6.11 mb)
Фрагмент инструкции
Original Displays the video in the aspect ratio of the video signal input on the PBP screen. yyWhen the PBP mode is Off, Input, Audio, Swap, Sub Full, and Ratio menus become disabled. The Main/Sub options for Ratio become disabled if there is no signal. NOTE PBPEasy controlPBPOff> Input> FunctionAudioHDMI> SwapPBPSub FullRatio> ScreenSettingsResetPBP PreviewDVI-D ^/Ў: Move / >: OK<: Back Picture 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Go to Screen > Picture by moving the joystick. 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to < or pressing ( / OK) it. 5 If you want to exit the OSD menu, move the joystick to < until you exit. Each option is described below. Menu > Screen > Picture Description Sharpness Adjusts the sharpness of the screen. Black Level Sets the offset level (for HDMI only). • Offset: as a reference for a video signal, this is the darkest color the monitor can display. High The picture of the screen gets brighter. Low The picture of the screen gets darker. Response Time Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Moddle. For a fast-moving picture, it is recommended that you use High. Setting to High may cause image sticking. High Sets the response time to High. Middle Sets the response time to Middle. Low Sets the response time to Low. Off Does not use the response time improvement feature. ScreenEasy controlPicture> Color> FunctionPBPScreenSettingsReset ^/Ў: Move / >: OK<: Back Color 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. 2 Go to Screen > Color by moving the joystick. 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to < or pressing ( / OK) it. 5 If you want to exit the OSD menu, move the joystick to < until you exit. Each option is described below. Menu > Screen > Color Description Gamma Custom gamma settings: When using the gamma 0, gamma 1 and gamma 2 monitor settings, higher gamma settings mean a brighter image is displayed and vice versa. Color Temp. Custom Selects the factory default picture color. Warm Sets the screen color to a reddish tone. Medium Sets the screen color to between a red and blue tone. Cool Sets the screen color to a bluish tone. Red You can customize the picture color using Red, Green and Blue colors. Green Blue Six Colors Meets the user requirements for colors by adjusting the tone and saturation of the six colors (red, green, blue, cyan, magenta and yellow) and then saving the settings. Hue Adjusts the tone of the screen colors. Saturation Adjusts the saturation of the screen colors. The lower the v...
Эта инструкция также подходит к моделям:Мониторы - 25UM65 (6.03 mb)