Оценок - 0, средний балл: 0
(
)
)
|
Фото и характеристики LG 24EB23TM |
Фрагмент инструкции
IPS LED MONITOR MODEL 24EB23TM ENGENGLISH ENGENGLISH TABLE OF CONTENTS 2 Contents 3 AsseMBLInG AnD PRePAR- InG 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 -Attaching the Stand Base 5 -Detaching the Stand Base 6 -Mounting on a table 6 -Using the cable holder 8 -Mounting on a wall 9 UsInG tHe MonItoR set 9 Connecting to a PC 9 -D-SUB connection 9 -DVI-D connection 11 -Peripheral device connection 12 CUstoMIZInG settInGs 13 Customizing Settings 13 -Menu Settings 14 -Picture 15 -Color 16 -Display 17 -Others 18 MY KEY Setting 19 FUNC. Setting 19 -Picture Mode 20 -SUPER ENERGY SAVING 21 -DUAL DISPLAY 21 -DUAL WEB 22 -MY KEY Setting 23 tRoUBLesHootInG 25 sPeCIFICAtIons 25 24EB23TM 26 Preset Modes (Resolution) 26 Indicator 27 PRoPeR PostURe 27 Proper posture for using the Monitor set. 3 ENEGNLGISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. y yDo not use any unapproved accessories to ensure the safety and product life span. y yAny damages or injuries by using unapproved accessories are not covered by the warranty. y yThe accessories supplied with your product may vary depending on the model. y yProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. CAUTION NOTE CD(Owner's Manual) / Card D-SUB Cable (This cable is not included in all countries.) Power Cord DVI-D Cable (This cable is not included in all countries.) Stand Body Stand Base ASSEMBLING AND PREPARING 4 Parts and buttons ENGENGLISH (Power Button) Power Indicator yLED On : Power is on y LED Off: Power is off Front Side Buttons Input Connectors (See p.9 to 11) 5 ENEGNLGISH ASSEMBLING AND PREPARING Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. CAUTION 2 Stand Base Stand Body 1 2 3 y yThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. y yDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. CAUTION Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 Stand Base Stand Body Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. 1 2 3 Stand Body Stand Base 6 ENEGNLGISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. Using the cable holder 10 cm 10 cm 10 cm 10 cm Cable holder 2 3 Press the (Power) button on the front of the monitor to turn on the monitor. y yUnplug the power cord prior to moving or installing the monitor. There is risk of electric shock. Caution 1 2 Connect the Power cord to the monitor, then plug the power cord into the wall outlet. (Before connect please check the “ON/OFF” knob in “O” state). Press the “ON/OFF” knob in “ ” state (Open the power). .............. ASSEMBLING AND PREPARING 7 Using the Kensington security system When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. wARnInG Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. note Front Rear The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit Connect the Kensington security system cable between the Monitor set and a table. The Kensington security system is optional. You can obtain it from most electronics stores. note ENGENGLISH ENGENGLISH ENGENGLISH ASSEMBLING AND PREPARING 8 Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the scre...
Эта инструкция также подходит к моделям:Мониторы - 24EB23TM-B (8.13 mb)
Мониторы - 24EB23TM-W (8.13 mb)