Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
-Remove small box and its contents. -Remove the cardboard cross brace. -Remove the plastic wrapped cresting panel. 2 Assembly of Cresting Panel. Main Cabinet Cresting PanelWingnut view of top of cabinet Locate cresting panel packed in bubble wrap. Unwrap the cresting panel and remove the wingnuts. Place the cresting panel on the rear of the top of the cabinet. Take the wingnuts and fasten the cresting panel to the cabinet through the holes at each end of the cabinet. For: WOOD STOVES - go through the cabinet door. GAS, ELECTRIC & COMBINATION STANDARD OR SELF CLEAN STOVES - go through the filter openings. (NOTE: if your cupboards are too low the cresting panel may be left off). 3 ELECTRIC AND COMBINATION STOVES ONLY STOVETOP Gasket - Peel off backing and stick on. Bracket Sheet metaI screw (black) Steel Washer Machine screw (Nickel Plated) Gasket Machine screw Steel washer Sheet metal screw -Remember when working with the cabinet, the cabinet is top heavy. Use your hand to support it during installation. -Place box on the floor close to stove. (See Fig. 1 Page 2). -With a helper,lift cabinet assembly from box by area that is circled.(See Fig.1 Page 2). -Rest the cabinet assembly on the carton,while your helper steadies the cabinet,peel the cabinet backing off the gasket and stick one on each bracket. -Place cabinet assembly onto stove body.(See diagram above) Caution: In the case of the Glass cooktop models 8200, 8210, 6200, 6210: DO NOT REST CLOSET CORNER BRACKETS ON GLASS, to prevent damage to glass top -Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the cabinet, fasten the cabinet brackets to the stove top with machine screws . -To fasten the splashback to the rear of stove, with the Models 5200, 5210, 6200, 6210 use 5 sheet metal screws and washers. For Models 4200, 4210, 8200, 8210 use 4 sheet metal screws and washers. To prevent chipping do not overtighten or use power tools. 4 GAS STOVES ONLY STOVETOP Gasket - Peel off backing and stick on. Bracket (WOOD STOVES SEE NEXT PAGE) Sheet metaI screw (black) Steel Washer Nut Machine screw (Nickel Plated) Gasket Nut Machine screw Steel washer Sheet metal screw 48" models only-right brackel front screw attachment:machine screw attached to stove top without use of nut. -Remember when working with the cabinet, the cabinet is top heavy. Use your hand to support it during installation. -Place box on the floor close to stove. (See Fig. 1 Page 2). -With a helper,lift cabinet assembly from box by area that is circled.(See Fig.1 Page 2). -Rest the cabinet assembly on the carton,while your helper steadies the cabinet,peel the cabinet backing off the gasket and stick one on each bracket. -Place cabinet assembly onto stove body.(See diagram above) -Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the cabinet, fasten the cabinet brackets to the stove top with machine screws and nuts. -To faste...
Эта инструкция также подходит к моделям:Плиты - 1902 (153.79 kb)
Плиты - 1903 (153.79 kb)
Плиты - 620 (153.79 kb)
Плиты - 6210 (153.79 kb)