Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Мониторы - M2900S-BN (3.4 mb)
Мониторы - M2900S-BN (3.44 mb)
Фрагмент инструкции
Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Using the Remote Control Name of the Remote Control Buttons • Power On/Off Button • Source Button SOURCE ZOOM MENU • Auto Button Select input source Automatic adjustment function (RGB, DVI) (Operational for the analog signal only) • buttons OSD Menu Navigation • buttons • Menu Button Select OSD Menu Item. OSD On/ Off : Decrement Value Sub OSD Menu out : Increment Value • button Zoom Hot key (Normal Zoom Full) * Only OSD menu off 1. Slide off the battery cover. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cover. • Dispose of used batteries in the recycle bin to prevent environmental pollution. Inserting batteries into remote control. 1 CR2025 Name and Function of the Parts * The product image in the user’s guide could be different from the actual image. Rear View DVI, RGB Ports RS-232C Serial Port Wired Remote Control Port Power Connector : Connect the power cord 2 Connecting to External Devices First of all, see if the computer, product and the peripherals are turned off. When Connecting to your PC Then, connect the signal input cable. A When connecting with the D-Sub signal input cable. (RGB) RGB IN PC Rear side of the product. DVI IN B When connecting with the DVI signal input cable. PC Rear side of the product. Rear side of the product. Connect the power cord. 3 Connecting to External Devices 1 Turn on power by pressing the power button on the product. SOURCE Zoom Power button 2 Turn on the PC. To change input source Press the SOURCE button on the remote control to select the input signal. Or, press the SOURCE button on the bottom of the product. DVI signal D-Sub signal 4 • How to connect to two computers. Connect the signal cables (DVI and D-Sub) to each computer. Press the SOURCE button on the remote control to select the computer to use. • Directly connect to a grounded power outlet or power strip (three prong connector.) Note Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchaed separately and not available from LG. Refer to the instructions included with hte mount for more info. 5 User Menus SOURCE Zoom Screen Adjustment options Power Button • Press this button to turn on the power. Press this button again to turn it off. Power Indicator • This Indicator lights up green when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. MENU Button • Use this button to show/hide the OSD (On Screen Display) menu screen. • Use this button to select an icon or adjust the setting in the OSD screen. OSD Select / Adjust Button OSD Menu Navigation up and down : Zoom Hot key (Normal Zoom Full) Zoom : Select Menu Item, Decrement Value : Select Menu Item, Increment Value 6 User Menus Screen Adjustment options SOURCE Button To change input source depending on connected signal. Press the SOURCE button on the remote control to select the input signal. Or, press the SOURCE button on the bottom of the product. DVI signal D-Sub signal Digital signal 15-pin D-Sub analog signal IR Receiver • This is where the unit receives signals from the remote control. 7 User Menus OSD Menu Icon Function Description PICTURE OSD TIMER ZOOM Adjusts screen brightness, contrast and color that you prefer. Adjusts the OSD image. Adjusts the timer options. Adjusts the screen size. 8 Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. User Menus How to adjust the OSD (On Screen Display) screen MENU MENUMENU • Use the remote control to adjust the OSD screen. Pops up the menu screen Move where you want to adjust Move where you want to adjust Select a menu icon Select a menu icon Adjust the status Save adjustment Exit from the menu screen. 1 Press the MENU Button, then the main menu of the OSD appears. 2 To access a control, use the Buttons. 3 When the icon you want becomes highlighted, press the Button. 4 Use the Buttons to adjust the item to the desired level. 5 Accept the changes by pressing the MENU Button. 6 Exit the OSD by pressing the MENU Button. How to adjust the screen automatically Press the AUTO button on a remote Control in the PC analog signal. Then optimal screen settings will be selected that fit into the current mode. If adjustment is not satisfactory, you can adjust the screen manually. Auto-Adjust 9 User Menus Adjusting Screen Color PICTURE Contrast Brightness Color Temp. H- Position V-Position Clock Phase Auto Adjust Move Select Exit Cool MENU Contrast Adjust the difference between the light and dark levels in the picture. Brightness To adjust the brightness of the screen. Color Temp Color Settings PICTURE Contrast Brightness Color Temp. H- Position V-Position Clock Phase Auto Adjus...
Эта инструкция также подходит к моделям:Мониторы - M3800S-BN (1.98 mb)