Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The fixed image may become permanently imprinted on the screen use a screen saver when possible. > > There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. > > The synchronization input waveform for Horizontal and Vertical frequencies are separate. > > We recommend using 1920 x 1080 @ 60 Hz (Except for M2080D/M2080DF/M2080DB/ M2080DN),1600 x 900 @ 60 Hz (Only M2080D/ M2080DF/M2080DB/M2080DN) for the PC mode, this should provide the best picture quality. > > Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the SET or the signal cable from the HDMI output port of the PC to the HDMI/DVI IN port on the SET. > > Connect the audio cable from the PC to the Audio input on the SET. (Audio cables are not included with the SET). > > If using a sound card, adjust PC sound as required. > > If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI/DVI IN to display the PC output on the SET. > > If the graphic card on the PC does output analogue and digital RGB simultaneously, set the SET to either RGB or HDMI. (The other mode is set to Plug and Play automatically by the SET.) > > DOS mode may not work depending on the video card if you use an HDMI to DVI cable. > > If you use too long an RGB-PC cable that is too long, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality. WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the set. . (POWER) ENERGY SAVING TV/PC INPUT TV/RAD Switches the set on from standby or off to standby. Adjust the Energy Saving mode of the SET. (> P. 72) Selects TV or PC mode. External input mode rotates in regular sequence. Selects Radio, TV and DTV channel. WAT C H I N G T V / P R O G R A M M E C O N T R O L 0~9 number button LIST Q.VIEW Selects a programme. Selects numbered items in a menu. Displays the programme table. (> P. 62) Returns to the previously viewed programme. MENU GUIDE Q. MENU THUMBSTICK (Up/Down/Left/Right) OK BACK . EXIT Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu. (> P. 44) Shows programme schedule. (> P. 65 to 68) Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio, Sleep Timer, Favourite, USB Device). (>P.43) Allows you to navigate the on-screen menus and adjust the system settings to your preference. Accepts your selection or displays the current mode. Allows the user to move return one step in an interactive application, EPG or other user interaction function. Shows the present screen information. Clears all on-screen displays and returns to TV viewing from any menu Coloured buttons These buttons are used for teletext (on TELETEXT models only) , Programme edit. 40 WAT C H I N G T V / P R O G R A M M E C O N T R O L 41 VOLUME UP/DOWN FAV MARK RATIO MUTE Programme UP/DOWN PAGE UP/DOWN Adjusts the volume. Displays the selected favourite programme. (> P. 63) Check and un-check programmes in the USB menu. Selects your desired Aspect Ratio of picture. Switches the sound on or off. Selects a programme. Move from one full set of screen information to the next one. 1 TELETEXT BUTTONS SUBTITLE These buttons are used for teletext. For further details, see the ‘Teletext’ section. (> P. 134 to 135) Recalls your preferred subtitle in digital mode. USB Menu control buttons Auto Config. USB menu(Photo List and Music List or Movie List ). Automatically adjusts picture position and minimizes image instability. Installing Batteries 1 ¦ ¦ Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +, -with -) ¦ ¦ Install two 1.5 V AAA batteries. Don’t mix old or used batteries with new ones. ¦ ¦ Close cover. ¦ ¦ To remove the batteries, perform the installation actions in reverse. WATCHING TV / PROGRAMME CONTROL WAT C H I N G T V / P R O G R A M M E C O N T R O L 42 TURNING ON THE TV - - When your TV is turned on, you will be able to use its features. 1 Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the / I, INPUT or P.. button on the TV or press the POWER, INPUT, P..or NUMBER button on the remote control and the TV will switch on. 2 Initializing setup If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Mode Setting, Country or Set Password (When France is selected for Country), Auto Tuning. Note: a. If you close without comp...
Эта инструкция также подходит к моделям:Мониторы - M2380DB-PZ (8.74 mb)
Мониторы - M2780D-PZ (8.74 mb)
Мониторы - M2380DB-PC (8.74 mb)