|
Фрагмент инструкции
30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL SOG (Sync On Green) Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Max VESA 1280 x 1024 @75 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B 0n Mode : 30 W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Width 36.96 cm / 14.55 inches Height 39.13 cm / 15.41 inches Depth 18.48 cm / 7.28 inches Without Stand 36.96 cm / 14.55 inches 31.51 cm / 12.41 inches 6.05 cm / 2.38 inches Net 3.0 kg ( 6.62 lbs) Tilt -5.~20. AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without notice. A19 Specifications 19 inch Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 48.2 cm 0.294 mm pixel pitch Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL SOG (Sync On Green) Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Max VESA 1280 x 1024 @75 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B 0n Mode : 34 W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Width 40.63 cm / 16.00 inches Height 41.97 cm / 16.52 inches Depth 18.48 cm / 7.28 inches Without Stand 40.63 cm / 16.00 inches 34.45 cm / 13.56 inches 5.99 cm / 2.36 inches Net 3.45 kg (7.61 lbs) Tilt -5.~20. AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without notice. A20 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 640 x 350 31.469 70 2 720 x 400 31.468 70 3 640 x 480 31.469 60 4 640 x 480 37.500 75 5 800 x 600 37.879 60 6 800 x 600 46.875 75 7 832 x 624 49.725 75 8 1024 x 768 48.363 60 9 1024 x 768 60.123 75 10 1152 x 870 68.681 75 11 1152 x 900 61.805 65 *12 1280 x 1024 63.981 60 13 1280 x 1024 79.976 75 * Recommend Mode Indicator LED ColorMODE On Mode blue Sleep Mode flicker Off Mode Off A21 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 2. Separate the stand by pushing the PUSH button. Good Position Bad Position Warning: You can hurt your finger. 3. Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. A22 Dig...
Эта инструкция также подходит к моделям:Мониторы - L1742S (1.34 mb)
Мониторы - L1742S-BF (1.34 mb)
Мониторы - L1742S-PF (1.34 mb)
Мониторы - L1742S-SF (1.34 mb)