Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
In this case, LG Electronics is not responsible for it. 4 VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications. 5 Please use a VESA standard as below. y 784.8 mm (30.9 inch) and under * Wall Mount Pad Thickness : 2.6 mm * Screw : .4.0 mm x Pitch 0.7 mm x Length 10 mm y 787.4 mm (31.0 inch) and above * Please use VESA standard wall mount pad and screws. Model E1951S E2051S E2251S E1951T E2051T E2251T E2351T E2251VR E2351VR E2251VQ E2351VQ VesA (A x B) 75 x 75 screw size M4 number of screws 4 Wall mount bracket (optional) RW120 y VESA(Ax B) ENGENGLISH yDisconnect the power cord first before moving or installing the Monitor set. Otherwise electric shock may occur. yIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. yUse only an authorized LG wall mount and contact a local dealer or qualified personnel. yDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty. yUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. yOnly use screws that are listed on the VESA standard screw specifications. yThe wall mount kit will include an installation manual and necessary parts. yThe wall mount bracket is optional. You can obtain additional accessories from your local dealer. yThe length of screws may differ depending on the wall mount. Be sure to use the proper length. yFor more information, refer to the instructions supplied with the wall mount. CAUtIon note AB ENGENGLISH ENGENGLISH 10 USING THE MONITOR SET UsInG tHe MonItoR set Connecting to a PC y Your Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-sUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. E1951S E2051S E2251S E1951T E2051T E2251T E2351T E2251VR E2351VR E2251VQ E2351VQ yApple Adapter An adapter may be needed for Apple computers. This adapter can be purchased from Apple. note USING THE MONITOR SET 11 ENGENGLISH DVI to HDMI connection Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with the DVI to HDMI cable as shown the following illustrations. E2051T E1951T E2251T E2351T CAUtIon y Connect the signal input cable and tighten it by turning the screws clockwise. y Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. y Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. E2251VR E2351VR E2251VQ E2351VQ ENGENGLISH ENGENGLISH 12 USING THE MONITOR SET HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. When the HDMI cable is connected, you can listen to the sound through headphones, earphones or an external speaker. E2251VR E2351VR E2251VQ E2351VQ yIf you use HDMI PC, it can cause compatibility problem. yWhen you want to use two PC in our Monitor, please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. yIf you turn the Monitor set on while it is cold, the screen may flicker. This is normal. ySome red, green, or blue spots may appear on the screen. This is normal. ySound output is available only in HDMI input mode. The quality of the sound may be reduced depending on the performance of headphones, earphones or external speaker. note Self Image Setting Function Press the power button on the front panel to turn the power on. When monitor power is turned on, the "self Image setting" Function is executed automatically. (Only supported in Analog Mode) y"self Image setting" Function. This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) y‘AUto’ Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) note CUSTOMIZING SETTINGS 13 CUstoMIZInG settInGs Accessing the Main Menus 1 Press any button on the front of the Monitor set to display the MonItoR setUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select eXIt to leave the OSD menu. Monitor set Buttons MEN...
Эта инструкция также подходит к моделям:Мониторы - E2251S (1.64 mb)
Мониторы - E2251S-BN (1.64 mb)
Мониторы - E2251VR-BN (1.64 mb)
Мониторы - E2351T (1.64 mb)