Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Only 19/22/26LE3***, 22/26LE5*** After connecting the cables as necessary, install Cable Holder as shown and bundle the cables. Cable Holder Only 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5*** 1 Secure the power cord with the Cable Holder on the TV back cover. It will help prevent the power cable frombeing removed by accident. Cable Holder 2 After connecting the cables as necessary, install Cable Holder as shown and bundle the cables. PREPARATION Cable Holder PREPARATION PREPARATION ATTACHING THE TV TO A DESK (Only 32LE3***, 32LE4***, 32LE5***) ¦ Ima4e shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use onlyan attached screw. Desk Stand 1-Screw ( provided as parts of the product) WARNING >To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. SWIVEL STAND (Only 26/32LE3***, 32/37/42LE4***, 26LE5***, 32/37/42/47/55LE5***) ¦ Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. CONNECTION OF TV (Only 19/22/26LE3***, 22/26LE5***) ¦ Image shown may differ from your TV. DC Adapter Connect the antenna cable to the antenna input port on the TV. Connect the DC adapter plug to the powerinput jack on the TV. Connect the power cord to the DC adapterfirst, then plug the power cord into the wallpower outlet. 1 2 3 CAUTION > Please be sure to connect the TV to the DC power adapter before connecting the TV's power plug to a wall power outlet. DESKTOP PEDESTAL INSTALLATION ¦ Image shown may differ from your TV. For adequate ventilation allow a clearance of 10 cm all around the TV. 10 cm 10 cm 10 cm 10 cm KENSINGTON SECURITY SYSTEM ¦ This feature is not available for all models. ¦ Image shown may differ from your TV. The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. CAREFUL INSTALLATION ADVICE ¦ You should purchase necessary components to fix the TV safety and secure to the wall on the market. ¦ Position the TV close to the wall to avoid the possibility of it falling when pushed. ¦ The instructions shown below are a safer wayto set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do notclimb or hang from the TV. PREPARATION For further information, contact com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors. NOTE 2 1 1 2 1 >The Kensington Security System is an Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the pic- optional accessory. >If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. >Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. >Avoid touching the LCD screen or holding ture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracketthat is mounted on the wall. 2 3 your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. 3 Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product. NOTE >When moving the TV undo the cords first. >Use a platform or cabinet strong and large enough to support the size and weight of the TV. >To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. PREPARATION ¦ The TV can be installed in various ways such as on a wall, or on a desktop etc. ¦ The TV is designed to be mounted horizontally. EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. Power Supply Circuit breaker 10 cm 10 cm 10 cm 10 cm 10 cm PREPARATION WALL MOUNT: HORIZONTAL Model VESA (A * B) Standard QuantityScrew 19/22/26LE3*** INSTALLATION 100 * 100 M4 4 ¦ We recommend the use of a LG Brand wall 32LE3*** 200 * 100 M4 4 32...