Оценок - 0, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: 1 2 3 4 Press the discretionary Button, then the main menu of the OSD appears. To access a control, use the corresponding Buttons. Use the / Buttons to adjust the image to the desired level. Use the Button to select other sub-menu items. Press the EXIT Button to exit from the OSD. 13 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. DSUB DVI-D : D-SUB(Analog signal) input : DVI-D(Digital signal) input BRIGHTNESS CONTRAST SHARPNESS PICTURE To adjust the brightness, contrast and sharpness of the screen DSUB DVI-D Main menu Sub-menu Supported input Description COLOR TEMP (PRESET / USER) GAMMA COLOR To customize the color of the screen DSUB DVI-D DISPLAY HORIZONTAL VERTICAL DSUB To adjust the position of the screen CLOCK PHASE DSUB To improve the clarity and stability of the screen OTHERS To customize the screen status for a user's operating environment LANGUAGE POWER INDICATOR DSUB DVI-D WHITE BALANCE DSUB FACTORY RESET DSUB DVI-D NORMAL MOVIE INTERNET F-ENGINE To select or customize desired image settings DSUB DVI-D WIDE ORIGINAL ORIGINAL RATIO (Only E2210T /E2210S) To adjust the image sizeDSUB DVI-D PHOTO EFFECT NORMAL GAUSSIAN BLUR SEPIA MONOCHROME DSUB DVI-D To adjust screen color mode 14 NOTE The order of icons may differ depending on the model (14~23). On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. 15 Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name Icons Button TipExit Adjust (Decrease/Increase) Select another sub-menu Restart to select sub-menu Press the MENU Button, then the main menu of the OSD appears. On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description BRIGHTNESS CONTRAST SHARPNESS To adjust the brightness of the screen. To adjust the contrast of the screen. To adjust the clearness of the screen. Exit : Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu COLOR TEMP PRESET Select the screen color. • sRGB: Set the screen color to fit the sRGB standard color specification. • WARM: Set the screen to warm color temperature . • MEDIUM: Set the screen to medium color temperature. • COOL: Set the screen to cool color temperature. Exit : Exit : Decrease RED USER : Increase Set your own red color levels. : Select another sub-menu : Restart to select sub-menu GREEN Set your own green color levels. BLUE Set your own blue color levels. GAMMA Set your own gamma value. : 0 / 1 / 2 On the monitor, high gamma values display whitish images and low gamma values display blackish images. 16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description E1910T/E2210T HORIZONTAL VERTICAL CLOCK E1910S/E2210S PHASE : Select another sub-menu : Restart to select sub-menu Exit : Exit : Decrease : Increase To move image left and right. To move image up and down. To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. 17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Exit : Exit : Decrease : Increase : Select another sub-menu : Restart to select sub-menu LANGUAGE POWER INDICATOR WHITE BALANCE FACTORY RESET To choose the language in which the control names are displayed. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Restore all factory default settings except "LANGUAGE." Press the , buttons to reset immediately. NOTE If this does not improve the screen image, restore the factory default settings. If necessary, execute the WHITE BALANCE function again. This function will be enabled only when the input signal is an analog signal. 18 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of ...
Эта инструкция также подходит к моделям:Мониторы - E1910T-BN (4.51 mb)
Мониторы - E2210T (4.51 mb)
Мониторы - E2210T-BN (4.51 mb)