Производитель: Panasonic Размер: 2.64 mb Название файла: KXMB2000.PDF Язык инструкции:

Перейти к скачиванию

Confirm that [Panasonic Trap Monitor Service], [Panasonic LPD Manager] and [Panasonic LPD] are displayed and checked on the [Inbound Rules] list. 11.3.10 Notice for KX-MB200/KX-MB700/KX-FLB880 series users If you have already installed KX-MB200/KX-MB700/KX-FLB880 series Multi-Function Station on your computer, use the following instructions to modify or add the printer driver, which changes after installing the KX-MB2000 series Multi-Function Station. You can modify or add a printer driver, as follows: 1 Start Windows and insert the KX-MB200/KX-MB700/KX-FLB880 series CD-ROM into your CD-ROM drive. R If the [Select Language] dialog box appears, select the desired language that you want to use with this software. Click [OK]. 2 [Easy installation] 3 [Modify] A [Next] 4 Select [Modify Utility] or [Add Printer Driver]. A [Next]. Then follow the on-screen instructions. Important: R For users of versions prior to 1.12, download the latest software as follows, then activate it. [Start] A [All Programs] or [Programs] A [Panasonic] A the unit’s name A [Support Web Page]. Then follow the on-screen instructions. For assistance, please visit 12.12.s Case 1: 12.1 Recording paper jam When the recording paper has jammed near the manual input tray: Caution: R Do not pull out the jammed paper forcibly before 1. Pull open the paper input tray (A). opening the top cover. RTo prevent injuries, be careful not to put your hands under the top cover. A 2.Open the manual input tray (B) and remove the jammed paper (C) carefully by pulling it upwards. Then close the manual input tray. CB 3. Close the paper input tray. 12.1.1 When the recording paper has jammed inside of the unit The display will show the following: – “PAPER JAMMED” “OPEN TOP COVER” – “CHECK REAR COVER” D 12.12.s R Open and close the top cover (D) to clear the Case 2: message. When the recording paper has jammed near the drum and toner cartridge: 1. Pull open the paper input tray (A). A 2. Open the top cover (B) by holding the indentations (C) on both sides of the unit. DEBCC Caution: R The fuser unit (D) gets hot. Do not touch it. Note: R Do not touch the transfer roller (E). 12.12.s 3.Remove the jammed paper (F) carefully by pulling it upwards. F4.Close the paper input tray. 5. Close the top cover by holding the indentations on Remove the jammed paper (G) carefully by pulling it both sides of the unit, until locked. toward you. G 12.12.s Case 3: 3. Remove the jammed paper (F) carefully by pulling it upwards. When the recording paper has jammed near the fuser unit: 1. Open the top cover (A) by holding the indentations (B) on both sides of the unit. DABBC Caution: RThe fuser unit (C) gets hot. Do not touch it. Note: R Do not touch the transfer roller (D). 2. Lift both green levers (E) until they stop. F 4. Push back the green levers (G) to the original position. G E 12.12.s 5. Close the top cover by holding the indentations on 12.1.2 When the recording paper is not fed both sides of the unit, until locked. into the unit properly The display will show the following: – “CHECK PAPER #1 PRESS START” 1 Pull the paper input tray until it clicks into place, then pull it completely out, lifting the front part of the tray. Remove the recording paper and straighten. 2 Re-load the recording paper. 3 Insert the paper input tray into the unit, lifting the front part of the tray. Then push it completely into the unit. Note: R If the message is still displayed, check the recording paper specifications and load the recording paper again. See page 14 for details. 12.1.3 When the recording paper in the manual input tray is not fed into the unit properly The display will show the following. – “CHECK PICK UP INPUT TRAY #2” 1 Remove the recording paper. 2 Re-insert the recording paper. 12.12.s Note: R If the message is still displayed, check the recording paper specifications and re-install recording paper. See page 15 for details. 12.2 Document jams (Automatic document feeder) (KX-MB2010/ KX-MB2030 only) Note: R The pictured model is KX-MB2010. Caution: R Do not pull out the jammed document forcibly before lifting the ADF cover. 1 Open the ADF cover (A) while holding the document cover (B). AB 12.12.s 2 Remove the jammed document (C) carefully. When the document has jammed near the document entrance: C When the document has jammed near the document exit: C 3 Close the ADF cover. 13.13.g 2 Hold the document cover while cleaning the white 13.1 Cleaning the white plates and plates (B) and the scanner glass (C). glass Clean the white plates and glass when a black line, a white line or a dirty pattern appears on: – your recording paper, – the original document, – the scanned data, or – the fax document received by the other party (KX-MB2030 only). Caution: R Be careful when handling the drum and toner cartridge. See the caution for the drum cartridge on page 10 for details. R Do not use paper products, such as paper towels or tissues for cleaning. 13.1.1 White pla...

Эта инструкция также подходит к моделям:
Принтеры - CM0310DY0-CD (2.64 mb)

Скачать инструкцию

Чтобы скачать, введите 2 цифры: