Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(Available in Analog mode only) MENU > , > > , > > , > MENU Sharpness Changes the clearance of image. 44 Adjusting the Monitor ( Not available in MagicColor mode of Full and Intelligent. ) MENU > , > > , > > , > MENU H-Position Changes the horizontal position of the monitor's entire display. (Available in Analog mode only) MENU > , > > , > > , > MENU V-Position 45 Adjusting the Monitor Changes the vertical position of the monitor's entire display. (Available in Analog mode only) MENU > , > > , > > , > MENU OSD Language You can choose one of nine languages. Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. MENU > , > > > , > MENU 46 Adjusting the Monitor H-Position You can change the horizontal position where the OSD menu appears on your monitor. MENU > , > > , > > , > MENU V-Position You can change the vertical position where the OSD menu appears on your monitor. MENU > , > > , > > , > MENU 47 Adjusting the Monitor Transparency Change the transparency of the background of the OSD. • Off • On MENU > , > > , > > , > MENU Display Time The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. 48 Adjusting the Monitor • 5 sec • 10 sec • 20 sec • 200 sec MENU > , > > , > > , > MENU Setup Reset Reverts the product settings to factory defaults. • No • Yes MENU > , > > , > > MENU 49 Adjusting the Monitor Customized Key You can specify a function which will be activated when the Customized Key ( )is pressed. MENU > , > > , > > , >MENU Off Timer The monitors will turn off automatically at the specified time. • Off • On 50 Adjusting the Monitor MENU > , > > , > > , > > , > MENU Auto Source Select Auto Source for the monitor to automatically select the signal source. • Auto • Manual MENU > , > > > , > MENU 51 Adjusting the Monitor Information Shows a video source, display mode on the OSD screen. MENU > , >MENU 52 Troubleshooting Self-Test Feature Check Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor. If the monitor is functioning properly, you will see a box in the illustration below. This box appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly. Warning Messages If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable. Environment The location and the position of the monitor may influence the quality and other features of the monitor. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor. Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the monitor to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. 53 Troubleshooting Judging the monitor's working condition If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1280 x 1024 60 Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on. If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition. In this case, check the computer for trouble. Check List Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. No images on the screen. I cannot turn on the monitor. Q: Is the power cord connected properly? A: Check the power cord connection and supply. Q: Can you see "Check Signal Cable" on the screen? A: (Connected using the D-sub cable) Check the signal cable connection. (Connected using the DVI cable) If you still see an error message on the screen when the monitor is connected properly, check to see if the monitor status is set to analog. If you still see an (error) message on the screen when the monitor is connected properly, check to see if the monitor status is set to analog....
Эта инструкция также подходит к моделям:Мониторы - 743B (4.16 mb)
Мониторы - 743BX (4.16 mb)
Мониторы - 943B (4.16 mb)
Мониторы - 943BX (4.16 mb)