Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
7. Loosen the three canopy screws and separate the canopy from the base plate. Remove a knock out from the base plate. Support canopy and guide the black and white wires and from the transformer through the knock out in the base plate and into the Junction box. Connect ground wire from junction box to the green grounding wire from the base plate. Connect corresponding line volt wires from the junction box to transformer wires, with wire nuts (supplied). Tuck excess wire into the junction box. Attach the base plate to the junction box using the slotted holes. Raise the canopy to the base plate, and tighten the three screws loosened earlier. — Junction Box Base Plate Ground wire Canopy Quick Connect fitting Finishing ring Shown with QF-194 Fixture (not included) W* A* C I LIGHTING 615 South Street, Garden City; NY 11530 Tel: (516) 515-5000 Fax: (516) 516-5050 168 Brea Canyon Road, City of Industry, CA 91789 Tel: (909) 468-1848 Fax: (909) 468-9958 11 /22/06 Rev 1...
Эта инструкция также подходит к моделям:Мебель - QMP-M1RN (50.53 kb)