Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
) MENU > , > > , > > , > MENU H-Position Changes the horizontal position of the monitor's entire display. (Available in Analog mode only) MENU > , > > , > > , > MENU Adjusting the Monitor V-Position Changes the vertical position of the monitor's entire display. (Available in Analog mode only) MENU > , > > , > > , > MENU OSD Language You can choose one of nine languages. Adjusting the Monitor Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. MENU > , > > > , > MENU H-Position You can change the horizontal position where the OSD menu appears on your monitor. MENU > , > > , > > , > MENU Adjusting the Monitor V-Position You can change the vertical position where the OSD menu appears on your monitor. MENU > , > > , > > , > MENU Transparency Change the transparency of the background of the OSD. • Off • On MENU > , > > , > > , > MENU Adjusting the Monitor Display Time The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. • 5 sec • 10 sec • 20 sec • 200 sec MENU > , > > , > > , > MENU Setup Reset Adjusting the Monitor Reverts the product settings to factory defaults. • No • Yes MENU > , > > > , > MENU Customized Key You can specify a function which will be activated when the Customized Key ( ) is pressed. MENU > , > > , >> , >MENU Adjusting the Monitor Off Timer The monitors will turn off automatically at the specified time. • Off • On MENU > , > > , >> , > > , > MENU Auto Source Select Auto Source for the monitor to automatically select the signal source. Adjusting the Monitor • Auto • Manual MENU > , > > , >> , >MENU Image Size You can change the size of the screen displayed on your monitor. • Auto • Wide • Auto - The screen is displayed in accordance with the screen aspect ratio of the input signals. • Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals. Note • Signals not available in the standard mode table are not supported. • If the wide screen which is the optimal resolution for the monitor is set on your PC, this function is not performed. MENU > , > > , >> , > MENU Adjusting the Monitor Information Shows a video source, display mode on the OSD screen. MENU > , >MENU {2243EW/2243EWX} Direct Functions AUTO When the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the animated screen on the center. Adjusting the Monitor Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values of Fine, Coarse and Position are adjusted automatically. (Available in Analog mode only) If auto adjustment does not work properly, press 'AUTO' button again to adjust picture with more accuracy. If you change resolution in the control panel, auto function will be executed automatically. OSD Lock & Unlock When pressing the AUTO button after locking the OSD When pressing the MENU button after locking the OSD Adjusting the Monitor This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings. Lock : Hold down the MENU button for more than five (5) seconds to activate the OSD adjustment lock function. Unlock : Hold down the MENU button for more than five (5) seconds to deactivate the OSD adjustment lock function. Note Though the OSD adjustment lock function is activated, you can still adjust the brightness and contrast, and adjust Customized Key ( ) using the Direct button. Adjusting the Monitor Customized key You can customize key assignment for the Custom button according to your preferences. To view the operating screen displayed when pressing the [ ] button after configuring the customized key for a function, click the name of each function. ( Image Size -MagicBright -MagicColor -Color Effect) Note You can configure the customized key for a required function via Setup > Customized Key. Adjusting the Monitor Brightness When OSD is not on the screen, push the Brightness ( ) button to adjust brightness. SOURCE Selects the video signal while the OSD is off. Adjusting the Monitor {2243EW/2243EWX} OSD Function Picture Brightness Contrast Magic- Bright Color MagicColor Color Tone Color Con-Color Effect Gamma trol Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Position V-Position Transpar-Display ency Time Setup Reset Custom-Off Timer Auto Image Size ized Key Source Information Picture Brightness (Not available in MagicBright mode of Dynamic Contrast.) You can use the on-screen menus to change the brightness according to personal preference. MENU > > > , > MENU Contrast (Not available in MagicBright mode of Dynamic Contrast.) Adjusting the Monitor You can use the on-screen menus to change the contrast according to personal preference. ( Not available in MagicColor mode of Full and Intelligent. ) MENU > > , > > , > MENU MagicBright Push the button to circle through ...
Эта инструкция также подходит к моделям:Мониторы - 2243EW (3.62 mb)
Мониторы - 943EW (3.62 mb)
Мониторы - 943EWX (3.62 mb)