Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
• Keystone correction allows you to correct trapezoidal distortion so that the image is square. • You can choose between video modes depending on your source: “normal” for a typical picture, “natural” for true color reproduction. • An image can be projected from in front or behind a screen, and the projector can even be installed on the ceiling. • NEC Technologies’ exclusive Advanced AccuBlend intelligent pixel blending technology - an extremely accurate image compression technology - offers a crisp image with SXGA (1280 x 1024) resolution*3. • Supports most IBM VGA, SVGA, XGA*2 , SXGA(with Advanced AccuBlend)*3, Macintosh, component signal (YCbCr / YPbPr) or any other RGB signals within a horizontal frequency range of 15 to 100 kHz and a vertical frequency range of 50 to 117 Hz. This includes NTSC, PAL, PAL60, SECAM and NTSC4.43 standard video signals. NOTE: Composite video standards are as follows: NTSC: U.S. TV standard for video in U.S. and Canada. PAL: TV standard used in Western Europe. PAL60: TV standard used for NTSC playback on PAL TVs. SECAM: TV standard used in France and Eastern Europe. NTSC4.43: TV standard used in Middle East countries. • The supplied remote control can be used without a cable. • You can control the projector with a PC using the PC Control port. • The contemporary cabinet design is light, compact, easy to carry, and complements any office, boardroom or auditorium. • Eight pointers are available for your presentation. *1 Do not attempt to mount the projector on a ceiling yourself. The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury. In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. Please consult your dealer for more information. *2 An XGA image (1024768) is converted into an 800600 crisp image with NEC technology’s Advanced AccuBlend on VT440. *3 An SXGA image (12801024) is converted into a 1024768 crisp image with NEC technology’s Advanced AccuBlend on VT540. Getting Started The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find an overview. If the section doesn’t apply, you can skip it. E–6 What's in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your MultiSync VT440/VT540 Projector. MENU ENTER CANCELSELECT POWERSTATUS ON/OFF SOURCE AUTOADJUST RGBINPUT OUTPUT AUD IN OUTPC-C TROL S-VIDEO VID Lens cap Projector String and rivet SELECT POINTER POWER HELP RD-366E PIC.MUTE MAGNIFY SOURCE AUTOADJ. MENU ENTER CANCEL Vol. Vol. Card remote control Power cable Signal cable 1 ON DIP23456 Pin adapter for Macintosh QuickConnectGuide User'sManual E–7 Getting to Know Your MultiSync VT440/VT540 Projector Front/ Side Features MENU E N T E R C A N C E LSELECT POWERSTATUS ON/STAND BY SOURCE AUTO ADJUST R G BIN P U T O U T P U A U D IN O U TP C -C R O L S -V ID E O V ID Controls Focus Ring Adjustable Tilt Foot Button AC Input Connect the supplied power cable’s three-pin plug here. Air-Filter (inlet) Remote Sensor Zoom Lever Slot for Kensington MicroSaver Security System Air-Filter (inlet) Terminal Panel Carrying Handle Remote Sensor Ventilation (outlet) Adjustable Tilt Foot Lens Lens Cap NOTE: Built-in Security Slot ( ) Carrying the Projector: Raise the carrying handle up. Always carry your projector by the This security slot supports the MicroSaver® Security System. carrying handle. MicroSaver® is a registered trademark of Kensington Microware Inc.The logo is trademarked and owned by Kensington Microware NOTE:When moving the projector or when it is not in use, cover the Inc. lens with the lens cap. CAUTION Do not put the projector on its side when the lamp is turned on. Doing so may cause damage to the projector. M E N UE N T E R C A N C E L SELECTPOWERSTATUS ON / OFF SOURCE AUTO ADJUST RGB IN T UTP S-VIDEO T AUD IN IN OUT OUT PC-C NT OL VIDEO E–8 Rear/ Side Features MENU ENTER CAN C E L SELECT POWERSTATUS ON/STANDBY SOURCE AUTOADJUST Remote Sensor Remote Sensor Rear Foot Built-in Monaural Speaker (1W) Rear Foot Lamp Cover Lamp Cover ScrewCard Remote Slot Slot for Card Remote Control Attaching the lens cap to the lens hood with the sup- The supplied card remote control can be stored in the cabinet. plied string and rivet To store the card remote control: 1. Thread the string through the hole on the lens cap and then tie a 1. Insert the card remote control STRAIGHT into the slot. knot in the string. 2. Push the card remote control until it is into place. Lens Cap 2. Tie a knot again SELECTVol. Vol. POINTERPOWERHELPRD-366E PIC.MUTE MAGNIFY SOURCE AUTOADJ. MENU E N TER CANCEL To pull out the card remote control: 1. Pu...