Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1. Entertain High brightness For watching motion pictures such as a DVD or VCD. 2. Internet Medium brightness For working with a mixture of images such as texts and graphics. 3. Text Normal brightness For documentations or works involving heavy text. 4. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU > > ENTER > [Picture] > > ENTER > [Custom] Note By adjusting the picture using the Custom function, MagicBright will change to Custom mode. Contrast MENU > > ENTER > [Picture] > > ENTER > [Custom] > ENTER> [Contrast] > , > ENTER Adjusting the PDP Display Adjusts the Contrast. Brightness MENU > > ENTER > [Picture] > > ENTER > [Custom] > > ENTER > [Brightness] >, > ENTER Adjusts the Brightness. Sharpness MENU > > ENTER > [Picture] > > ENTER > [Custom] > > > ENTER> [Sharpness] >, > ENTER Adjusts the Sharpness. Color Tone MENU > > ENTER > [Picture] > > >ENTER > [Color Tone] > , > ENTER The color tones can be changed. 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled. If you set the Color Tone to Off, the Color Control function is disabled Color Control Adjusts individual Red, Green, Blue color balance. Adjusting the PDP Display MENU > > ENTER > [Picture] > > >> ENTER > [Color Control] Note If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom mode. Red MENU > > ENTER > [Picture] > > >> ENTER > [Color Control] > ENTER > [Red] > , > ENTER Green MENU > > ENTER > [Picture] > > >> ENTER > [Color Control] > > ENTER > [Green] > , > ENTER Blue MENU > > ENTER > [Picture] > > >> ENTER > [Color Control] > > > ENTER > [Blue] > , > ENTER Color Temp MENU > >ENTER >[Picture] > > >>ENTER >[Color Temp] > , >ENTER Color Temp is a measure of the 'warmth' of the image colors. Note This function is only enabled if the Color Tone is set to Off. Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. (Available in PC mode only) MENU > > ENTER > [Picture] > > >>> ENTER > [Image Lock] Coarse MENU > > ENTER > [Picture] > > >>> ENTER > [Image Lock] > ENTER > [Coarse] > , > ENTER Adjusting the PDP Display Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Fine MENU > > ENTER > [Picture] > > >>> ENTER > [Image Lock] > > ENTER > [Fine] > , > ENTER Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). H-Position MENU > > ENTER > [Picture] > > >>> ENTER > [Image Lock] >> > ENTER > [H-Position] > , > ENTER Adjusts the screen location horizontally. V-Position MENU > > ENTER > [Picture] > > >>> ENTER > [Image Lock] >>> > ENTER > [V-Position] > , > ENTER Adjusts the screen location vertically. Auto Adjustment MENU > > ENTER > [Picture] > > > >>> ENTER > [Auto Adjustment ] The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. (Available in PC mode only) Note The direct button on the remote control is the 'AUTO' button. Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. MENU > > ENTER > [Picture] > > > >>>> ENTER > [Signal Balance] (Available in PC mode only) Adjusting the PDP Display Signal Balance MENU > > ENTER > [Picture] > > > >>>> ENTER > [Signal Balance] > ENTER > [Signal Balance] > , > ENTER Selects either On or Off with the signal control. Signal Control MENU > > ENTER > [Picture] > > > > >> > ENTER > [Signal Balance] >> ENTER > [Signal Control] 1. R-Gain MENU > > ENTER > [Picture] > > > > >> > ENTER > [Signal Balance] >> ENTER > [Signal Control] > ENTER > [R-Gain] > , > ENTER 2. G-Gain MENU > > ENTER > [Picture] > > > > > > > ENTER > [Signal Balance] > >ENTER >[Signal Control] > >ENTER >[G-Gain] > , >ENTER 3. B-Gain MENU > > ENTER > [Picture] > > > Balance] > > ENTER > [Signal Control] > > ENTER > > > > ENTER > [Signal > ENTER > [B-Gain] > , > 4. R-Offset MENU >> ENTER > [Picture] >>> > >> > ENTER > [Signal Balance] >> ENTER > [Signal Control] >> > > ENTER > [R-Offset] > , > ENTER 5. G-Offset MENU > > ENTER > [Picture] > > Balance] > > ENTER > [Signal Control] > > , > ENTER > > > > > > > ENTER > [Signal > > ENTER > [G-Offset] Adjusting the PDP Display 6. B-Offset MENU > > ENTER > [Picture] > > > Balance] > > ENTER > [Signal Control] > > Offset] > , > ENTER > > > > > > ENTER > [Signal ...
Эта инструкция также подходит к моделям:Мониторы - P50F (2.33 mb)
Мониторы - P50FN (2.33 mb)
Мониторы - P63FN (2.33 mb)