Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
B-Gain MENU > > ENTER > [Picture] > > > Balance] > > ENTER > [Signal Control] > > ENTER > > > > ENTER > [Signal > ENTER > [B-Gain] > , > 4. R-Offset MENU >> ENTER > [Picture] >>> > >> > ENTER > [Signal Balance] >> ENTER > [Signal Control] >> > > ENTER > [R-Offset] > , > ENTER 5. G-Offset MENU > > ENTER > [Picture] > > Balance] > > ENTER > [Signal Control] > > , > ENTER > > > > > > > ENTER > [Signal > > ENTER > [G-Offset] Adjusting the PDP Display 6. B-Offset MENU > > ENTER > [Picture] > > > Balance] > > ENTER > [Signal Control] > > Offset] > , > ENTER > > > > > > ENTER > [Signal > > ENTER > [B- Size MENU > > ENTER > [Picture] > > > > >> > > ENTER > [Size] > , > ENTER The Size can be switched. 1. 16:9 2. 4:3 Picture [ AV / HDMI / DVI / TV Mode] Available Modes • PC • AV • HDMI / DVI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed. • F model can use MagicInfo menu when mounted Network box. Mode MENU > > ENTER > [Picture] > ENTER > [Mode] > , > ENTER Adjusting the PDP Display The PDP Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. Dynamic, Standard, Movie, or Custom can be activated. 1. Dynamic 2. Standard 3. Movie 4. Custom Note The direct button on the remote control is the 'P.MODE' button. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU > > ENTER > [Picture] > > ENTER > [Custom] Contrast MENU > > ENTER > [Picture] > > ENTER > [Custom] > ENTER> [Contrast] > , > ENTER Adjusts the Contrast. Brightness MENU > > ENTER > [Picture] > > ENTER > [Custom] > > ENTER > [Brightness] >, > ENTER Adjusts the Brightness. Sharpness MENU > > ENTER > [Picture] > > ENTER > [Custom] >> > ENTER > [Sharpness] > , > ENTER Adjusting the PDP Display Adjusts the picture Sharpness. Color MENU > > ENTER > [Picture] > > ENTER > [Custom] >>> > ENTER > [Color] > , > ENTER Adjusts the picture Color. Tint MENU > > ENTER > [Picture] > > ENTER > [Custom] > > >> > ENTER > [Tint] > , > ENTER Adds a natural tone to the display. Note Tint function can be available just in NTSC system. Color Tone MENU > > ENTER > [Picture] > > > ENTER > [Color Tone] > , > ENTER The color tones can be changed. The individual Color components are also user adjustable. 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp function is disabled. Adjusting the PDP Display Color Temp. MENU >>ENTER >[Picture] >>>>ENTER > [Color Temp.] >, >ENTER Color temp is a measure of the 'warmth' of the image colors. Note This function is only enabled if the Color Tone is set to Off. Size MENU > > ENTER > [Picture] > > > >> ENTER > [Size] > , > ENTER The Size can be switched. 1. 16:9 - Sets the picture to 16:9 wide mode. 2. Zoom 1 - Magnifies the size of the picture on the screen. 3. Zoom 2 - Magnifies the size of the picture more than “Zoom 1”. 4. 4:3 - Sets the picture to 4:3 normal mode. 5. Just Scan - Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i, 1080p signals are input. Note Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Just Scan feature. ZOOM1, ZOOM2 will be unavailabel in HDMI mode. Note The Position and Reset functions are available when Zoom1 or Zoom2 is run. Digital NR (Digital Noise Reduction) MENU > > ENTER > [Picture] > > > >>> ENTER > [Digital NR] > , > ENTER Adjusting the PDP Display Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On Film Mode MENU > > ENTER > [Picture] > > > > > > > ENTER > [Film Mode ] > , > ENTER The Film Mode feature offers you a theater-quality viewing experience. (In HDMI mode, this function can be available when the input signal is interlaced scan; it cannot be available with progressive scan signal.) 1. Off 2. On Sound Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed. • F model can use MagicInfo menu when mounted Network box. Mode MENU > >> ENTER > [Sound] > ENTER > [Mode] > , > ENTER Adjusting the PDP Display The PDP Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or concerts. 3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialogue (i.e., news). 5. Custom Selects Custom if you want to adjust the settings according to your personal preferences. Custom The sound settings can be adjusted to suit your personal preferences. MENU > >> ENTER > [Sound] >> ENTER > [Custom ] Note • You can hear the sound even when sound value is set to 0. • If you adjust sound using Custom function, Mode will turn to Custom mode. Bass MENU > >> ENTER > [Sound] >> ENTER > [Custom ...
Эта инструкция также подходит к моделям:Мониторы - P50F (2.33 mb)
Мониторы - P63F (2.33 mb)
Мониторы - P63FN (2.33 mb)