Оценок - 5, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
For those who reside in other countries, please contact a nearest local Samsung dealer for recycling information for the products to be treated in environmentally acceptable way. [U.S.A. Residents Only] [European Residents Only] U.S.A. SWEDEN NORWAY GERMANY COMPANY Solid Waste Transfer & Recycling Inc ELKRETSEN Elektronikkretur AS vfw AG ADDRESS 442 Frelinghuysen Ave Newark, NJ 07114 ELKRETSEN Box 1357, 111 83 Stockholm Barnhusgatan 3, 4 tr. 6454 Etterstad 0602 Oslo Fyrstikkalln 3B Max Plank Strasse 42 50858 Collogne Germany TELEPHONE 973-565-0181 08-545 212 90 23 06 07 40 49 0 2234 9587 - 0 FAX Fax: 973-565-9485 08-545 212 99 23 06 07 41 E- MAIL none info@el-kretsen.se adm@elektronikkretur.no vfw.info@vfw-ag.de HOME PAGE Waste_Disposal.htm se/ Medical Requirement Classifications: In accordance with UL 2601-1/IEC 60601-1, the product is cssified as Continuous duty Class I equipment, which is not protected against ingress of liquids. The product is not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide. EMC This equipment has been tested and found to comply with the limits for medical devices to the IEC 601-1-2:1994. These limits are designed to provide reasonable protection against harmful interference in a typical medical installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving device. • Increase the separation between the equipment. • Connect the equipment into an outlet on a circuit different from that to which the other device(s) are connected. • Consult the manufacturer or field service technician for help. Video In / RS 232 / Video Out Accessories equipment connected to the analog and digital interfaces must be certified to the respective IEC standards (i.e. IEC 950 for data processing equipment and IEC 601-1 for medical equipment.) Furthermore all configurations shall comply with the system standard IEC 601-1-1. Everybody who connects additional equipment to the signal input part or signal output part configures a medical system, and is therefore, responsible that the system complies with the requirements of the system standard IEC 601-1-1. If in doubt, consult the technical services department or your local representative. Transport and Storage Limitations: Temperature Range of -40°C to +70°C Relative Humidity of 10 -95%, non-condensing * Bio-accumulative is defined as substances which accumulate within living organisms. ** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative. Mercury Statement (LCD Monitor, LCD TV, DLP Projection TV, Projector for USA only) LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS For details see lamprecycle.org, eiae.org, or call 1-800-Samsung INFORMACION de PRODUCTO (Libre de retencion de imagenes) Los monitores de LCD y las TV pueden tener retencion de la imagen al cambiar desde una imagen a otra, especialmente despues de visualizar una imagen inmovil durante mucho tiempo. Esta guia describe el uso correcto de los productos LCD para protegerlos contra la retencion de imagenes. .Que es la Retencion de imagenes? Durante el funcionamiento normal de un panel LCD, no se produce la retencion de imagenes de pixeles. Sin embargo, si se visualiza la misma imagen durante mucho tiempo, se acumula una leve diferencia en carga electrica entre los dos electrodos que contienen el cristal liquido. Esto puede provocar la acumulacion del cristal liquido en ciertas areas de la pantalla. Como resultado, se conserva la imagen anterior al cambiar a una nueva imagen de video. Todos los productos de imagen, incluyendo las LCD, son vulnerables a la retencion de imagenes. No es un defecto del producto. Siga las sugerencias a continuacion para proteger su LCD frente a la retencion de imagenes Power Off (Apagado), Screen Saver (Protector de pantalla), o Modo Power Save (Ahorro de energia) Ejemplo) • Apague la alimentacion cuando se visualice una imagen estatica. -Apague la alimentacion durante 4 horas despues de 24 horas de uso -Apague la alimentacion durante 2 horas despues de 12 horas de uso • Utilice un Protector de pantalla si es posible - Se recomienda un protector de pantalla de un color o una imagen en movimiento. • Configure el monitor para que se apague con el esquema de alimentacion de Propiedades de Pantalla del equipo informatico. Sugerencias para aplicaciones e...
Эта инструкция также подходит к моделям:Мониторы - 913N (5.59 mb)