Оценок - , средний балл:
(
)
)
Производитель: Clarion
Размер: 490.59 kb
Название файла: d40f8d4b-7659-4ac7-88f3-2a8203b5d981.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
• Keep drinks and drops from umbrellas away from the set. Water may damage the internal circuitry. • Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 14°F - 144° F). • In extremely cold temperatures, the movement of the picture may be slow and the picture may be dark, but this is not a malfunction. The set will work normally once the temperature increases. • Small black and shiny dots inside the liquid crystal panel are normal for liquid crystal product. 2. DESCRIPTION The OHM720/OHM820 is a TFT active matrix color LCD monitor that delivers a striking picture and superior image resolution. The OHM720/OHM820 can be used to enjoy video images with the Clarion video sources, even if no TV tuner is connected. 3. PACKAGE CONTENTS DESCRIPTION Q’TY LCD Monitor 1 IR Headphones (WH100H) 2 Universal Trim Ring 1 IR Remote Control 1 A/V Din Cables 2 TV Input Ribbon Cable 1 FM Modulator Din Cable 1 Power Connector 1 M3X8 Screws 5 Manual/Installation Guide 1 OHM720, OHM820 OHM720, OHM820 4. MONITOR BUTTON FUNCTIONS 1 Monitor Release Button 2 Dome Light Switch 3 Power Button 4 Channel Select Up 5 Channel Select Down 6 Mode Selector 7 FM Modulator On/Off Button 8 Auxiliary Input Selector 9 Power LED 10 IR Sensor 5. DESCRIPTION OF IR REMOTE CONTROL Button Functions 3 4 OWNER’S MANUAL 4 OWNER’S MANUAL 1 Power Button for Monitor Powers on monitor 2 TV/Video Button Switches between A/V1, A/V2, TV. 3 FM Modulator Button Turns FM Modulator ON/OFF. 4 Auto Memory Button for TTX001 (TV Tuner) Locks channels with good reception. 5 Channel Up for TTX001 (TV Tuner) Changes TV channels up. 6 Channel Down for TTX001 (TV Tuner) Changes TV channels down. 7 Picture Select Button for Monitor Goes into picture mode menu for Monitor to select Contrast, Brightnesss, Color, Tint and Wide Screen Mode. 8 Picture Mode Up Button Adjusts selected picture mode. 9 Picture Mode Down Button Adjusts selected picture mode. 10 TV Tuner/VCR Button for VDH910 (VCR) Changes input source selection from VCR to TV Tuner. 11 Enter Button for VDH910 (VCR) Toggles between selection of the On-Screen Menu choice. 12 Menu Button for VDH910 (VCR) Displays the On-Screen Menu, or changes and exits the On-Screen Menu. 13 Power Button for VDH910 (VCR) Powers the unit ON or OFF. 14 FF Button for VDH910 (VCR) Press FF to fast forward the tape. 15 Play Button for VDH910 (VCR) Press button to play the videocassette. 16 REW Button for VDH910 (VCR) Press REW to rewind the tape. 17 Skip Button for TTX001 (TV Tuner) Will skip through channels with no reception. 18 Shift Button for TTX001 (TV Tuner) Changes menu selection. 19 Stop Button for VDH910 (VCR) Press to stop any play, fast forward, or rewind mode. 20 Still/Slow Button for VDH910 (VCR) Press once to pause for STILL frame. Press again to advance frame by frame. Press and hold button for SLOW motion playbacks. 21 Channel Track DOWN Button for VDH910 (VCR) In TV Tuner mode, changes TV Channels down. 22 Channel Track UP Button for VDH910 (VCR) In TV Tuner mode, changes TV Channels up. OHM720, OHM820 OHM720, OHM820 6. USING REMOTE CONTROL Inside the vehicle, simply aim the IR Remote Control directly at the OHM720/ OHM820, or at a Clarion monitor, or video source with an IR eye input and press any desired button for better results. Also note the following: • Aim the IR Remote Control from no further than 7 feet away and no more than 3 feet on either side of the sensor. • Direct sunlight or very bright light will reduce sensitivity to the IR remote signal commands. Be sure the monitor is not located in direct sunlight. • Objects between the monitor will interfere or block IR remote signal commands. 7. INSERTING THE BATTERIES 1. Locate the battery compartment on the back of the IR Remote Control. 2. Remove the battery holder and insert two AAA alkaline batteries matching polarity as shown inside the battery holder. 3. Snap the battery holder back into the remote unit until it locks with a click. 5 8. WIRING PRECAUTIONS Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer. 1. Disconnect the negative (-) lead of the battery before making any power connections. 2. When creating passage holes for the power wires, use grommets to eliminate any sharp edges created during drilling. This will protect the wire from being nicked and causing a short circuit. 3. When connecting the ground lead, fasten the ground lead (black wire) securely to a clean metal plate on the vehicle. NOTE: The OHM720/OHM820 monitor displays video images only. It does not provide audio output. Refer to the owner's manual of the connected device for the information on audio output. OWNER’S MANUAL OWNER’S MANUAL 9. INSTALLATION INSTRUCTIONS The OHM720/OHM820 is an overhead, flip-down 7"/8” monitor with an infrared (IR) eye. It wi...
Эта инструкция также подходит к моделям:Мониторы - OHM720 (490.59 kb)