Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Medium grinding die L. Feed screw (includes feed screw gear) M. Cutter blade N. Coarse grinding die O. Screw riug P. Separator Q. Sausage stuflfcr R. Kebbe former S. Kebbe cone T. Cookie die U. Cookie die holder INTRODUCTION Thank you for purchasing the Maverick's Deluxe Food Grinder. The powerful motor will grind through the thickest meats. You’ll be able to save money by buying wholesome foods in bulk and doing the grinding at home. The grinder is perfect for homemade sausage, fish, game, meat loaf, hamburger, baby food and many other items. It grinds cheese, nuts, fruits and vegetables. Enjoy processing your own food and eating healthier. Features: • 3 - #8 size stainless steel dies • stainless steel cutting blade • sausage cone & separator ■ kebbe maker • cookie maker • wrench for screw ring • thermostat to prevent motor overheat damage • power indicator light, ON-OFF button and REVERSE button • 120 VAC, 60 Hz, 575 Watts This appliance is equipped w'ith a thermostat cut off. This system will automatically cut off the power supply to the appliance in case of overheating. If you plug in, the indicator light will be on. CAUTION: In order to avoid a hazardous situation, this appliance must never be connected to a timer switch. 2 IMPORTANT SAFEGUARDS 1. Read all instructions for use carefully and look at the illustrations before using the appliance. 2. Keep these instructions for use for fuUire reference. 3. Check if the voltage indicated on (he appliance corresponds to the local mains voltage before you connect the appliance. A. Never use any accessories of parts from other manufacturers. Your warranty will become invalid if such accessories or parts have been used. 5. Do not use the appliance if the mains cord, the plug or other parts are damaged. 6. If the mains cord of this appliance is damaged, it must always be replaced by manufacture or a service center authorized, In order to avoid hazardous situations 7. Thoroughly clean the parts that will come into contact with food before you use the appliance for the first time. 8. Unplug from outlet before putting on or taking off parts, and before cleaning. 9. Do not use outdoors. 10. Do not let cord hang over edge of table or counter. 11. Do not use fingers to scrape food away from discharge die while appliance is operating. Cut type injury may result. 12. Never use you finger or an object to push ingredients down the feed tube while the appliance is running. Only the pusher is to be used for this purpose. 13. Keep the appliance out of the reach of children. 14. Never let the appliance run unattended. 15. Switch the appliance off before detaching any accessory. 16. Wait until moving parts have slopped running before you remove the parts of the appliance. 17. Never immerse the motor unit in water or any other liquid, nor rinse it 3 • under the tap. Use only a moist cloth to clean the motor unit. 18. Do not attempt to grind bones, nuts or other hard items. 19. Never reach into the cutter housing. Always use the pusher. 20. Do no! operate the appliance for more than 15 minutes at one time. After 15 minutes continuous use, allow a few minutes rest before next use. 21. Never operate (using cookie maker) the appliance continuously for more than 3 minutes at 575W. 22. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. SAVE THESE INSTRUCTIONS 4 How to use you appliance Grinder 1. Insert the feed screw into the cutter housing, the plastic end first. Place the cutter blade onto the feed screw.. (The cutting edges should be at the front) Place fine, medium grinding die or coarse grinding die (depending on the consistency you prefer) onto the feed screw. (Make sure the notch of the grinding die fits onto the projections of the cutter housing) Turn the screw ring in the direction of the arrow on the cutter housing until it is properly fastened. 2. Attach the cutter housing to the motor unit. 3. Place the tray on the upright part of the cutter housing. 4. Now the appliance is ready for grinding GRINDING: Cut the meat into 3’Mong, 3’’-thick strips. Remove bones, pieces of gristle and sinews as much as possible. (Never use frozen meat!) Put the meat in the tray. Use the pusher to gently push the meat into the cutter housing. (For steak tartare, grind the meat with the medium grinding disc twice.) NOTE: DO NOT OVERTIGHTEN T11E SCREW RING ONTO THE CUTTER HOUSING AS THE DIE WILL PUT EXCESSIVE PRESSURE ON THE CUTTER BLADE AND COULD CAUSE PREMATURE WEAR. JM a* £ 0 i&i V £ it* jr. n ■».% Making sausage 1. Grind the meat. insert the feed screw into the cutter housing, the plastic end first. Place the separator in the cutter housing. Place t...