Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• From time to time check the appliance for damages. Never use the appliance if it shows any signs of damage, but have it checked by a competent qualified electrician (*). Should the cord be damaged, it must be replaced by a competent qualified electrician(*). • Never leave the appliance unsupervised when in use. Keep out of reach of children or incompetent persons. • Only use the appliance for domestic purposes and in the way indicated in these instructions. Most of all, follow the instructions concerning the assembly of the accessories before starting the appliance. • Switch off the meat grinder and unplug it when not using it or during assembly and disassembly, respectively. • Never touch the worm or the blade without having removed the cord from the power outlet beforehand. • Do not use meat grinder near sources of heat (cooking tops, grill, oven). • Never immerse the appliance in water or any other liquid for any reason whatsoever. • Never use the appliance outside and always place it in a dry environment. • Never move the appliance by pulling the cord and never hang it by the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it. • Stand the appliance on a stable surface so that it cannot fall over. • This kind of appliance cannot function continuously; it is not a professional type of appliance. It is necessary to make temporary stops. Check the section « Important information » in the instruction manual. • To push the meat to the worm, always make use of the pusher only. Never use your fingers or other accessories. 2 USK MGR 25959 -080630 • You must keep this appliance clean, as it is in direct contact with food. (*) Competent qualified electrician: after sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any case you should return the appliance to this electrician. SAVE THESE INSTRUCTIONS POLARIZED PLUG INSTRUCTIONS Some appliances are equipped with a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit into the polarized outlet only one way. If the plug does not properly fit into the outlet at first, reverse it. If it still does not fit, contact a competent qualified electrician. Do not attempt to modify the plug in any way. For appliances equipped with a standard plug, simply insert the plug into the outlet without paying attention to the way you plug it. SHORT CORD INSTRUCTIONS A short detachable power supply cord is provided to reduce the hazards resulting from becoming entangled in, or tripping over a longer cord. Longer detachable power supply cords may be used if care is exercised in their use. • The electrical rating of the longer cord should be at least that of the appliance. If the electrical rating of the extension cord is too low, it could overheat and burn. • The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over. The extension cord should be a grounding-type 3-wire cord. 3 USK MGR 25959 -080630 PART DESCRIPTION Reverse knob 9 Cutting blade ON / OFF switch 10 Cutting plate (fine) Head inlet 11 Cutting plate (medium) Body 12 Cutting plate (large) Head 13 Kebbe attachment Filling tray 14 Sealing ring Pusher 15 Sausage attachment Worm 16 Head stopper 4 USK MGR 25959 -080630 10AB10AB 5 USK MGR 25959 -080630 IMPORTANT INFORMATION This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. Please refer to the rating label for the maximum continuous usage time (KB xx min where xx is the maximum usage time). The breaks should last at least 10 minutes. BEFORE FIRST USE It is necessary to clean all accessories (see paragraph "cleaning and care") and to dry them. ASSEMBLY OF THE ACCESSORIES AND OPERATION Make sure the power cord is unplugged and the ON/OFF switch is in OFF position before assembling the accessories. This instruction should be observed each time you assemble or replace accessories. Unscrew the locking screw by turning it anti-clockwise and insert the filling neck in the motor block. Once the filling neck is positioned correctly, tighten the locking screw by turning it clockwise (Fig. 1) and make sure it is tightly connected to the motor block. Put the worm on the motor shaft (Fig. 2) that you can see at the end of the filling neck (to check if it is positioned correctly, it should not be possible to turn it with the hand). A) Discs • These accessories allow mincing meat. According to the disc you choose, you can obtain more or less finely minced meat. • Place the blade upon the worm with its rounded side facing the worm. (Fig. 3) • Assemble one of the 3 discs upon the blade, making sure that its two arresting pins lock precisely into the corresponding recesses...