Оценок - 3, средний балл: 4.7 ( )

Производитель: Aegis Micro Размер: 1 mb Название файла: 92877615-d22e-5354-919c-dc258eca9d28.pdf Язык инструкции:

Clock symbol for cooking time is out. c Start up Figure 5 Push ON buttonQH I. Cavity is illuminated. Display shows 0000. Clock symbol for cooking time is on. Figure 6 Open the door. Fan comes on. Figure 7 Place food in the oven and Fan stops. close the door. The appliance is operational. Selecting cooking time and variable power Figure 8 Push buttons E to select cooking time. Max. cooking time: 99 min. 59 sec. Example: 1 min. 30 sec. Push buttons from left to right: 1. Ox 2. 1 x 3. 3x 4. Ox The display shows 0130. To change the time push buttons selecting the new time. Figure 9 Set slide control F to Example: 60 = 60% the required power level. Cook light flashes. For defrosting: Select defrost symbol ^ = 30% Figure 10 Push start button <î> (G). Fan is on. Programme end is indicated by Cook light is on. Countdown of cooking time is shown in display (D). See also “Starting, checking and finishing an acoustic signal. a programme”. 10 Cooking with variable power and temperature/food sensor Figure 7 Place food in the oven. Fan is on. Figure 11 Insert food sensor into food to be cooked or heated. In the case of meat joints insert sensor into the centre of the thickest part. Figure 12 Insert food sensor plug into Clock symbol for cooking time plug socket in the oven. will go out. Temperature symbol °C comes on. 40 °C will be shown on the left of display D. The lowest temperature to which foods can be heated is 40 °C. Close the door. The fan will stop. Figure 13 Push buttons E to Example: 50°C select temperature: Push buttons from left to right: 1.1x = 5 2. Ox = 0 Display shows 50 °C on the left hand side. Figure 14 Move the slide control to Example: 100 = 100%. the required power level: Cook light next to the start button will flash on and off. Figure 10 Push start button <£> (G). Fan comes on. Cook light will stay on. The appliance will start to cook. The temperature display will show 40 °C on the left hand side. After reaching 40 °C the temperature increase is shown on the display. On reaching the set temperature: 50 X will be shown twice - side-by-side - in the display. Fan will stop. Acoustic signal will come on. Remove food sensor from Food sensor must not be left in the oven. plug socket. Starting, checking and finishing a programme Figure 10 Push start button <£> Appliance operates according to selections made. Figure 6 Checking: For example to add ingredients or stir food. Open the door: Cooking programme will stop. Fan will come on. Cook light starts to flash. Close the door: Fan will stop. Cook light flashes. Count-down of cooking time is stationary. Push start button . Oven will only resume operation after the start button has been pushed. Count-down of cooking time resumes. Figure 15 Push OFF button I O l to All indicators will go out and the time switch off the oven after the acoustic signal has indicated the cooking end. of day will appear in the display. Remove food sensor from Warning! The food sensor must not the plug socket. be left in a switched on empty oven. 12 The correct utensils Figure 1B Ovenproof glass or glass ceramic oven dishes are the most used. These dishes allow microwaves to pass through directly to food. Dishes will remain cool unless cooking is prolonged, causing hot food to heat the dish. Glass, sturdy china and pottery serving dishes can also be used. These should not have silver, gold, platinum or other metal trims which will be damaged by the microwaves. Diswasher-safe plastics, usually quite rigid material can be used provided they can withstand the temperature of the food being cooked. Hard plastic trays, picnic ware and bowls, may be used for heating but not ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: