Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
It has six high speed 10/100 Mbps Ethernet interfaces to ensure high performance and network design flexibility, one DB-9 serial interface to provide access for a serial console, one DB-9 serial (COM) interface for a dialup modem/ISDN TA, and two USB interfaces. Flash memory stores and runs the pre-installed GNAT Box System Software. Power is supplied by a power cable. A reboot may be triggered using the "Reset" pin hole. Caution At least 6" should be provided behind the system to allow efficient cooling. Inadequate clearance can cause the system to overheat. Warning There are no user serviceable or upgradeable parts in the GB-2000X. Opening the unit will void the warranty on the system, and may cause injury. LED Status Indicators Front Panel LEDs Power LED When the firewall is powered up, the green Power LED on the front panel will be lit. Disk LED The red LED will light when the Compact Flash disk is accessed. 10/100 LED The green LED will remain unlit if a 10 Mbps connection is established; it will light if a 100 Mbps connection is established. Each 10/100 LED is located on the associated Ethernet connector. Link/Activity LED The green LED will light and remain solid when an Ethernet connection is established; it will blink when activity occurs over that connection. Each Link/ Activity LED is located on the associated Ethernet connector. © 2005 Global Technology Associates, Inc. sales@gta.com I/O Interface Specifications • Six (6) 10/100 Mbps Ethernet 10Base-T network interfaces on UTP Cat. 3, 4 and 5, and fast Ethernet 100Base-TX network interfaces on UTP Cat. 5. NIC 0 is factory set to IP address 192.168.71.254 . • Two (2) DB-9 (RS-232) serial interfaces The serial console / modem port should be set to 38,400 bps, 8 bit, 1 stop, no parity and flow control to hardware. • Two (2) USB interfaces • Two (2) PCI expansion slots JSB Ports ExhauS...