Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
The operator is responsible for following the warning and safety instructions in this manual and on the product. Explanation of Symbols on your product Warning. Read the user instructions carefully to make sure you understand all the controls and what they do. Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged. Keep the cable away from the blade. Do not use in the rain or leave the product outdoors while raining. The use of eye protection is recommended. instruction manual blade cover Handguard belt clip instruction manual blade cover Handguard belt clip EasiCut 420/450/510 EasiCut 600XT Safety General 1. Never allow children or people unfamiliar with these instructions to use the Hedgetrimmer. Local regulations may restrict the age of the operator. 2. Only use the Hedgetrimmer in the manner and for the functions described in these instructions. 3. Never operate the Hedgetrimmer when you are tired, ill or under the influence of alcohol, drugs or medicine. 4. The operator or user is responsible for accidents or hazards occurring to other people or their property. Electrical 1. The British Standards Institute recommend the use of a Residual Current Device (R.C.D.) with a tripping current of not more than 30mA. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it. 2. Before use, examine cable for damage, replace it if there are signs of damage or ageing. 3. Do not use the Hedgetrimmer if the electric cables are damaged or worn. 4. Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the electrical supply has been disconnected. Do not repair a cut or damaged cable. Replace it with a new one. 5. Your electric cable must be untangled, tangled cables can overheat and reduce the efficiency of your Hedgetrimmer. 6. Keep the cable clear of the cutting area and obstacles at all times. 7. Never carry the product by the cable. 8. Never pull on the cable to disconnect any of the plugs 9. Do not pull cable around sharp objects. 10.Always switch off at the mains before disconnecting any plug, cable connector or extension cable. 11. Switch off, remove plug from mains and examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Flymo replacement cable. 12.Always wind cable carefully, avoiding kinking. 13.Use only on AC mains supply voltage shown on the product rating label. 14.Our products are double insulated to EN50144. Under no circumstances should an earth be connected to any part of the product. Preparation 1. Always wear suitable clothing, gloves, and stout shoes. The use of safety glasses is recommended. Do not wear loose clothing or jewellery which can be caught in moving parts. 2. Thoroughly inspect the area where the Hedgetrimmer is to be used and remove all wires and other foreign objects. 3. Before using the machine and after any impact, check for signs of wear or damage and repair as necessary. 4. Always ensure the hand guard supplied is fitted before using the Hedgetrimmer. Never attempt to use an incomplete Hedgetrimmer or one with an unauthorised modification. Use 1. Use the Hedgetrimmer only in daylight or good artificial light. 2. Avoid operating your Hedgetrimmer on a wet hedge, where feasible. 3. Know how to stop the Hedgetrimmer quickly in an emergency. 4. Never hold the Hedgetrimmer by the guard. 5. Never operate the Hedgetrimmer with damaged guards or without guards in place. 6. Remove plug from mains before passing Hedgetrimmer to another person. 7. Avoid operating while people especially children are nearby. 8. Whilst using the Hedgetrimmer always be sure of a safe and secure operating position. Do not overreach. 9. Keep hands and feet away from the cutting means at all times and especially when switching on the motor. 10.Do not use stepladders whilst operating the Hedgetrimmer. 11. Remove the plug from the mains :- before leaving the Hedgetrimmer unattended for any period; - before clearing a blockage; -before checking, cleaning or working on the appliance; -if you hit an object. Do not use your Hedgetrimmer until you are sure that the entire Hedgetrimmer is in a safe operating condition; -if the Hedgetrimmer starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury. - before passing to another person. Maintenance and storage 1. Keep all nuts, bolts and screws secure to be sure the Hedgetrimmer is in safe working condition. 2. Replace worn or damaged parts for safety. 3. Be careful during adjustment of the Hedgetrimmer to prevent entrapment of the fingers between moving blades and fixed parts of the machine. 4. After use the Hedgetrimmer should be stored using the blade cover provided. CABLES IMPORTANT • Use only 1.00mm2 size cable up to...
Эта инструкция также подходит к моделям:Машинки для стрижки - EasiCut 450 (2.29 mb)
Машинки для стрижки - EasiCut 600XT (2.29 mb)