Оценок - 1, средний балл: 5 ( )

Производитель: Echo Размер: 902.37 kb Название файла: Язык инструкции:

Фото и характеристики  Echo  HC-1500

The following precautions are strongly recommended because the minimum exposure which might trigger the ailment is unknown. • Keep your body warm, especially the head, neck, feet, ankles, hands and wrists. • Maintain good blood circulation by performing vigorous armexercises during frequent work breaks and also by not smoking. • Limit the hours of operation. Try to fill each day with jobs where operating the trimmer or other hand-held power equipment is not required. • If you experience discomfort, redness and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration. Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years. To reduce the risk of RSI/CTS, do the following: • Avoid using your wrist in a bent, extended or twisted position. Instead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger. • Take periodic breaks to minimize repetition and rest your hands. • Reduce the speed and force with which you do the repetitivemovement. • Do exercises to strengthen the hand and arm muscles. • Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness or pain in the fingers, hands, wrists or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented. HEDGE CLIPPER OPERATOR'S MANUAL 9 DESCRIPTION The ECHO product you purchased has been factory pre-assembled for your convenience. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. CONTENTS __ 1 -Hedge Clipper Assembly __ 1 -Operators Manual __ 1 -Safety Manual __ 1 -Warranty Statement __ 1 -Warranty Registration Card __ 1 -Plastic Bag __ - T-Wrench __ - 8 mm x 10 mm Open end Wrench __ - Bottle 2.6 oz. 2-Cycle Oil __ 1 -Blade Cover EMISSION CONTROL - Emissions Models The emission control system for this engine is EM (Engine Modification). IMPORTANT ENGINE INFORMATION ENGINE FAMILY : TEH021UB24RA DISPLACEMENT : 21.2cc THIS ENGINE MEETS U.S. EPA PHI AND 1995 - 1999 CALIFORNIA EMISSION REGULATIONS FOR ULGE ENGINES. REFER TO OWNER’S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS. Emission Control Label (located on Engine) (EXAMPLE ONLY, information on label varies by FAMILY). IMPORTANT This spark ignition system complies with Canadian ICES-002. 10 10 1 2 HC-1500, 1600 3 4 6 7 8 9 10 11 12 13 1415 16 20 7 14 18 12 15 8 6 16 11 5 17 HC-2000, 2400, 2410 10 13 19 HEDGE CLIPPER OPERATOR'S MANUAL 11 1. SAFETY MANUAL - Read and understand this manual before operation. Keep manual in a safe location of safe operating techniques. 2. OPERATOR'S MANUAL - Read and understand this manual before operation. Keep manual in a safe location for future reference, i.e., operation, maintenance, storage and specifications. 3. POWER HEAD - Factory Assembled to the gear housing assembly. Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter. 4. REAR HANDLE - HC-1500, 1600. Contains the Stop Switch, Throttle Lockout and Throttle Trigger. 5. LEFT HAND REAR HANDLE - HC-2000, 2400, 2410. Contains the Stop Switch, Throttle Lockout and Throttle Trigger. 6. FRONT HANDLE / GUARDHC- 1500, 1600. Comfortable, textured finish provides anti-slip grip for front hand. Guard protects hand from the blades. Warning decals are located on guard. HC-2000, 2400 and HC-2410. Right Hand Handle, Rubber anti-slip grip, guard protects hand from the blades. Warning decals are located on guard. 7. STOP SWITCH HC- 1500. "TOGGLE SWITCH" located on the left side of the rear handle. Move switch UP to RUN, DOWN to STOP. HC-1600, HC-2000, 2400, 2410 "SLIDE SWITCH" mounted on top of the left hand rear handle. Move switch FORWARD to RUN, BACK to STOP. 8. THROTTLE TRIGGER LOCKOUT - This lever must be depressed before Throttle Trigger can be activated. 9. THROTTLE TRIGGER - Spring loaded to return to idle when released. Trigger Lockout must be depressed fully before Throttle Trigger will move. During acceleration, depress gradually for best operating technique. 10. BLADES - Double reciprocating blades mounted to a blade support bar. Models HC-1500, HC-1600 are double sided blades, meaning they are capable of cutting on either side of the blade. All other models are single sided. 11. AIR CLEANER - Contains replaceable filter...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: