Оценок - 4, средний балл: 4 ( )

Производитель: Flymo Размер: 288.01 kb Название файла: 89bc2ee1-7d2e-4cf3-80b8-ec4593b8d23e.pdf Язык инструкции:

13. Use only on AC mains supply voltage shown on the product rating label. 14. Flymo products are double insulated to EN60335. Under no circumstance should an earth be connected to any part of the product. Cables Use only 1.00mm2 size cable up to 30 metres length maximum. Maximum rating: 1.00mm2 size cable 10 amps 250 volts AC 1. Mains cables and extensions are available from your local Electrolux Outdoor Products Approved Service Centre. 2. Only use extension cables specifically designed for outdoor use. Preparation 1. Always wear suitable clothing, gloves, and stout shoes. The use of safety glasses is recommended. Do not wear loose clothing or jewellery which can be caught in moving parts. 2. Thoroughly inspect the area where the Hedgetrimmer is to be used and remove all wires and other foreign objects. ENGLISH - 1 Safety Precautions 3. Before using the machine and after any impact, check for signs of wear or damage and repair as necessary. 4. Always ensure the hand guard supplied is fitted before using the Hedgetrimmer. Never attempt to use an incomplete Hedgetrimmer or one with an unauthorised modification. Use 1. Use the Hedgetrimmer only in daylight or good artificial light. 2. Avoid operating your Hedgetrimmer on a wet hedge, where feasible. 3. Know how to stop the Hedgetrimmer quickly in an emergency. 4. Never hold the Hedgetrimmer by the guard. 5. Never operate the Hedgetrimmer with damaged guards or without guards in place. 6. Remove plug from mains before passing Hedgetrimmer to another person. X 7. Avoid operating while people especially children are nearby. 8. Whilst using the Hedgetrimmer always be sure of a safe and secure operating position. 9. Keep hands and feet away from the cutting means at all times and especially when switching on the motor. 10. Do not use stepladders whilst operating the Hedgetrimmer. 11. Remove the plug from the mains :- before leaving the Hedgetrimmer unattended for any period; - before clearing a blockage; -before checking, cleaning or working on the appliance; -if you hit an object. Do not use your Hedgetrimmer until you are sure that the entire Hedgetrimmer is in a safe operating condition; -if the Hedgetrimmer starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury. - before passing to another person. Maintenance and storage 1. Keep all nuts, bolts and screws secure to be sure the Hedgetrimmer is in safe working condition. 2. Replace worn or damaged parts for safety. 3. Be careful during adjustment of the Hedgetrimmer to prevent entrapment of the fingers between moving blades and fixed parts of the machine. 4. After use the Hedgetrimmer should be stored using the blade cover/storage holder provided. Preparation Instructions Fitting the Cable Holder to Your Hedgetrimmer (A) and (B) 2. Secure by pulling the cable holder, in the direction shown, away from the Hedgetrimmer, 1. Insert T-shaped hooks of cable holder into T-blades until it locks into position.(B) shaped holes on the underside of your Hedgetrimmer.(A) Starting and Stopping Before starting your Hedgetrimmer. 1. Form a loop in mains cable and push the loop through the hole in the cable holder as illustrated in Fig. C. 2. To secure, position the loop around the hook as illustrated in Fig. D. 3. Connect female extension cable connector to the male plug lead on your product. (E) 4. Connect to mains and switch on 5. Remove blade cover/storage holder as illustrated in Fig. F. To start your Hedgetrimmer 1. There are two switch levers fitted to your Hedgetrimmer. 2. Both switch levers need to be held in the operating position (G) for the product to start. To stop your Hedgetrimmer • Move Hedgetrimmer away from cutting area before stopping. 1. To stop, release one switch lever (H). ENGLISH - 2 How to Use How to Use your Hedgetrimmer 1. Inspect area to be cut before each use remove objects which can be thrown or become entangled in the cutting blades. 2. Always keep the Hedgetrimmer in front of your body. Hold handle firmly with both hands and stand in a secure and stable position. 3. Allow the cutting blades to reach full speed before entering the material to be cut. 4. Always work going away from people and solid objects such as walls, large stones, trees, vehicles etc. 5. If blade stalls, immediately stop the Hedgetrimmer. Disconnect the Hedgetrimmer from the power source and clear jammed debris from the cutting blades. Inspect blades and repair or replace as needed. Top Cutting Use a wide sweeping motion. (J) A slight downward tilt of the cutting blades in the direction of motion gives the best cutting results. Side Cutting When trimming the sides of the hedge, begin at the bottom and cut upwards (K), tapering the hedge inward at the top. This shape will expose more of the hedge, resulting in more uniformed growth. Caring for your Hedgetrimmer Cleaning (L) • USE GLOVES 1. Using a soft brush - remove debris from all air intakes and cutting blade. 2. Wipe over surface of your hedget...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: